fthielen/nginx-custom
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix

Browse Source
This commit is contained in:
root
2017-02-26 00:26:43 +01:00
parent 173f4a360c
commit acf03cf4a9
512 changed files with 6 additions and 320757 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
install.sh
View File

@@ -55,15 +55,17 @@ else
fi fi
if [ "{$DIST}" == "Fedora" ]; then if [ "{$DIST}" == "Fedora" ]; then
dnf install gcc gcc-c++ autoconf automake make -y dnf install gcc gcc-c++ autoconf automake make perl -y
elif [ "{$DIST}" == "Ubuntu" ] || [ "${DIST}" == "Debian" ]; then elif [ "{$DIST}" == "Ubuntu" ] || [ "${DIST}" == "Debian" ]; then
apt-get install gcc g++ autoconf automake make -y apt-get install gcc g++ autoconf automake make perl -y
elif [ "{$DIST}" == "CentOS" ]; then elif [ "{$DIST}" == "CentOS" ]; then
yum install gcc gcc-c++ autoconf automake make -y yum install gcc gcc-c++ autoconf automake make perl -y
elif [ "${DistroBasedOn}" == "suse" ]; then elif [ "${DistroBasedOn}" == "suse" ]; then
zypper install -y gcc gcc-c++ autoconf automake make zypper install -y gcc gcc-c++ autoconf automake make perl
fi fi
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.40.tar.gz
tar -zxf pcre-8.40.tar.gz
cd pcre-8.40 cd pcre-8.40
./configure ./configure
make make

1
pcre-8.40/.deps/dftables.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_byte_order.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_chartables.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_compile.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_config.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_dfa_exec.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_exec.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_fullinfo.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_get.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_globals.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_jit_compile.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_maketables.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_newline.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_ord2utf16.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_refcount.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_string_utils.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_study.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_tables.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_ucd.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_utf16_utils.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_valid_utf16.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_version.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre16_xclass.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre16_la-pcre_chartables.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_byte_order.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_chartables.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_compile.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_config.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_dfa_exec.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_exec.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_fullinfo.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_get.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_globals.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_jit_compile.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_maketables.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_newline.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_ord2utf32.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_refcount.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_string_utils.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_study.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_tables.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_ucd.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_utf32_utils.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_valid_utf32.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_version.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre32_xclass.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcre32_la-pcre_chartables.Plo
View File

@@ -1 +0,0 @@
# dummy

137
pcre-8.40/.deps/libpcre_la-pcre_byte_order.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_byte_order.lo: pcre_byte_order.c \
/usr/include/stdc-predef.h config.h pcre_internal.h /usr/include/ctype.h \
/usr/include/features.h /usr/include/sys/cdefs.h \
/usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
/usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
/usr/include/bits/typesizes.h /usr/include/endian.h \
/usr/include/bits/endian.h /usr/include/bits/byteswap.h \
/usr/include/bits/byteswap-16.h /usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_chartables.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_chartables.lo: pcre_chartables.c \
/usr/include/stdc-predef.h config.h pcre_internal.h /usr/include/ctype.h \
/usr/include/features.h /usr/include/sys/cdefs.h \
/usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
/usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
/usr/include/bits/typesizes.h /usr/include/endian.h \
/usr/include/bits/endian.h /usr/include/bits/byteswap.h \
/usr/include/bits/byteswap-16.h /usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_compile.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_compile.lo: pcre_compile.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_config.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_config.lo: pcre_config.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_dfa_exec.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_dfa_exec.lo: pcre_dfa_exec.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_exec.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_exec.lo: pcre_exec.c /usr/include/stdc-predef.h config.h \
pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_fullinfo.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_fullinfo.lo: pcre_fullinfo.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_get.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_get.lo: pcre_get.c /usr/include/stdc-predef.h config.h \
pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_globals.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_globals.lo: pcre_globals.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_jit_compile.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_jit_compile.lo: pcre_jit_compile.c \
/usr/include/stdc-predef.h config.h pcre_internal.h /usr/include/ctype.h \
/usr/include/features.h /usr/include/sys/cdefs.h \
/usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
/usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
/usr/include/bits/typesizes.h /usr/include/endian.h \
/usr/include/bits/endian.h /usr/include/bits/byteswap.h \
/usr/include/bits/byteswap-16.h /usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_maketables.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_maketables.lo: pcre_maketables.c \
/usr/include/stdc-predef.h config.h pcre_internal.h /usr/include/ctype.h \
/usr/include/features.h /usr/include/sys/cdefs.h \
/usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
/usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
/usr/include/bits/typesizes.h /usr/include/endian.h \
/usr/include/bits/endian.h /usr/include/bits/byteswap.h \
/usr/include/bits/byteswap-16.h /usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_newline.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_newline.lo: pcre_newline.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_ord2utf8.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_ord2utf8.lo: pcre_ord2utf8.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_refcount.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_refcount.lo: pcre_refcount.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_string_utils.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_string_utils.lo: pcre_string_utils.c \
/usr/include/stdc-predef.h config.h pcre_internal.h /usr/include/ctype.h \
/usr/include/features.h /usr/include/sys/cdefs.h \
/usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
/usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
/usr/include/bits/typesizes.h /usr/include/endian.h \
/usr/include/bits/endian.h /usr/include/bits/byteswap.h \
/usr/include/bits/byteswap-16.h /usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_study.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_study.lo: pcre_study.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_tables.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_tables.lo: pcre_tables.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_ucd.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_ucd.lo: pcre_ucd.c /usr/include/stdc-predef.h config.h \
pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_valid_utf8.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_valid_utf8.lo: pcre_valid_utf8.c \
/usr/include/stdc-predef.h config.h pcre_internal.h /usr/include/ctype.h \
/usr/include/features.h /usr/include/sys/cdefs.h \
/usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
/usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
/usr/include/bits/typesizes.h /usr/include/endian.h \
/usr/include/bits/endian.h /usr/include/bits/byteswap.h \
/usr/include/bits/byteswap-16.h /usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_version.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_version.lo: pcre_version.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

137
pcre-8.40/.deps/libpcre_la-pcre_xclass.Plo
View File

@@ -1,137 +0,0 @@
libpcre_la-pcre_xclass.lo: pcre_xclass.c /usr/include/stdc-predef.h \
config.h pcre_internal.h /usr/include/ctype.h /usr/include/features.h \
/usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
/usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
/usr/include/bits/types.h /usr/include/bits/typesizes.h \
/usr/include/endian.h /usr/include/bits/endian.h \
/usr/include/bits/byteswap.h /usr/include/bits/byteswap-16.h \
/usr/include/xlocale.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h \
/usr/include/limits.h /usr/include/bits/posix1_lim.h \
/usr/include/bits/local_lim.h /usr/include/linux/limits.h \
/usr/include/bits/posix2_lim.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h \
/usr/include/stdio.h /usr/include/libio.h /usr/include/_G_config.h \
/usr/include/wchar.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h \
/usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
/usr/include/bits/stdio.h /usr/include/stdlib.h \
/usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
/usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \
/usr/include/bits/select.h /usr/include/bits/sigset.h \
/usr/include/bits/time.h /usr/include/sys/sysmacros.h \
/usr/include/bits/pthreadtypes.h /usr/include/alloca.h \
/usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
/usr/include/string.h /usr/include/bits/string.h \
/usr/include/bits/string2.h \
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h \
/usr/include/stdint.h /usr/include/bits/wchar.h pcre.h ucp.h
/usr/include/stdc-predef.h:
config.h:
pcre_internal.h:
/usr/include/ctype.h:
/usr/include/features.h:
/usr/include/sys/cdefs.h:
/usr/include/bits/wordsize.h:
/usr/include/gnu/stubs.h:
/usr/include/gnu/stubs-64.h:
/usr/include/bits/types.h:
/usr/include/bits/typesizes.h:
/usr/include/endian.h:
/usr/include/bits/endian.h:
/usr/include/bits/byteswap.h:
/usr/include/bits/byteswap-16.h:
/usr/include/xlocale.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/limits.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/syslimits.h:
/usr/include/limits.h:
/usr/include/bits/posix1_lim.h:
/usr/include/bits/local_lim.h:
/usr/include/linux/limits.h:
/usr/include/bits/posix2_lim.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stddef.h:
/usr/include/stdio.h:
/usr/include/libio.h:
/usr/include/_G_config.h:
/usr/include/wchar.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdarg.h:
/usr/include/bits/stdio_lim.h:
/usr/include/bits/sys_errlist.h:
/usr/include/bits/stdio.h:
/usr/include/stdlib.h:
/usr/include/bits/waitflags.h:
/usr/include/bits/waitstatus.h:
/usr/include/sys/types.h:
/usr/include/time.h:
/usr/include/sys/select.h:
/usr/include/bits/select.h:
/usr/include/bits/sigset.h:
/usr/include/bits/time.h:
/usr/include/sys/sysmacros.h:
/usr/include/bits/pthreadtypes.h:
/usr/include/alloca.h:
/usr/include/bits/stdlib-bsearch.h:
/usr/include/bits/stdlib-float.h:
/usr/include/string.h:
/usr/include/bits/string.h:
/usr/include/bits/string2.h:
/usr/lib/gcc/x86_64-redhat-linux/6.3.1/include/stdint.h:
/usr/include/stdint.h:
/usr/include/bits/wchar.h:
pcre.h:
ucp.h:

1
pcre-8.40/.deps/libpcrecpp_la-pcre_scanner.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcrecpp_la-pcre_stringpiece.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcrecpp_la-pcrecpp.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/libpcreposix_la-pcreposix.Plo
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcre_jit_test-pcre_jit_test.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcre_scanner_unittest-pcre_scanner_unittest.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcre_stringpiece_unittest-pcre_stringpiece_unittest.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcrecpp_unittest-pcrecpp_unittest.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcregrep-pcregrep.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcretest-pcre16_printint.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcretest-pcre32_printint.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcretest-pcre_printint.Po
View File

@@ -1 +0,0 @@
# dummy

1
pcre-8.40/.deps/pcretest-pcretest.Po
View File

@@ -1 +0,0 @@
# dummy

BIN
pcre-8.40/.libs/libpcre.a
View File

Binary file not shown.

1
pcre-8.40/.libs/libpcre.la
View File

@@ -1 +0,0 @@
../libpcre.la

41
pcre-8.40/.libs/libpcre.lai
View File

@@ -1,41 +0,0 @@
# libpcre.la - a libtool library file
# Generated by libtool (GNU libtool) 2.4.6
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names=''
# The name of the static archive.
old_library='libpcre.a'
# Linker flags that cannot go in dependency_libs.
inherited_linker_flags=''
# Libraries that this one depends upon.
dependency_libs=''
# Names of additional weak libraries provided by this library
weak_library_names=''
# Version information for libpcre.
current=3
age=2
revision=8
# Is this an already installed library?
installed=yes
# Should we warn about portability when linking against -modules?
shouldnotlink=no
# Files to dlopen/dlpreopen
dlopen=''
dlpreopen=''
# Directory that this library needs to be installed in:
libdir='/usr/local/lib'

313
pcre-8.40/132html
View File

@@ -1,313 +0,0 @@
#! /usr/bin/perl -w
# Script to turn PCRE man pages into HTML
# Subroutine to handle font changes and other escapes
sub do_line {
my($s) = $_[0];
$s =~ s/</&#60;/g; # Deal with < and >
$s =~ s/>/&#62;/g;
$s =~ s"\\fI(.*?)\\f[RP]"<i>$1</i>"g;
$s =~ s"\\fB(.*?)\\f[RP]"<b>$1</b>"g;
$s =~ s"\\e"\\"g;
$s =~ s/(?<=Copyright )\(c\)/&copy;/g;
$s;
}
# Subroutine to ensure not in a paragraph
sub end_para {
if ($inpara)
{
print TEMP "</PRE>\n" if ($inpre);
print TEMP "</P>\n";
}
$inpara = $inpre = 0;
$wrotetext = 0;
}
# Subroutine to start a new paragraph
sub new_para {
&end_para();
print TEMP "<P>\n";
$inpara = 1;
}
# Main program
$innf = 0;
$inpara = 0;
$inpre = 0;
$wrotetext = 0;
$toc = 0;
$ref = 1;
while ($#ARGV >= 0 && $ARGV[0] =~ /^-/)
{
$toc = 1 if $ARGV[0] eq "-toc";
shift;
}
# Initial output to STDOUT
print <<End ;
<html>
<head>
<title>$ARGV[0] specification</title>
</head>
<body bgcolor="#FFFFFF" text="#00005A" link="#0066FF" alink="#3399FF" vlink="#2222BB">
<h1>$ARGV[0] man page</h1>
<p>
Return to the <a href="index.html">PCRE index page</a>.
</p>
<p>
This page is part of the PCRE HTML documentation. It was generated automatically
from the original man page. If there is any nonsense in it, please consult the
man page, in case the conversion went wrong.
<br>
End
print "<ul>\n" if ($toc);
open(TEMP, ">/tmp/$$") || die "Can't open /tmp/$$ for output\n";
while (<STDIN>)
{
# Handle lines beginning with a dot
if (/^\./)
{
# Some of the PCRE man pages used to contain instances of .br. However,
# they should have all been removed because they cause trouble in some
# (other) automated systems that translate man pages to HTML. Complain if
# we find .br or .in (another macro that is deprecated).
if (/^\.br/ || /^\.in/)
{
print STDERR "\n*** Deprecated macro encountered - rewrite needed\n";
print STDERR "*** $_\n";
die "*** Processing abandoned\n";
}
# Instead of .br, relevent "literal" sections are enclosed in .nf/.fi.
elsif (/^\.nf/)
{
$innf = 1;
}
elsif (/^\.fi/)
{
$innf = 0;
}
# Handling .sp is subtle. If it is inside a literal section, do nothing if
# the next line is a non literal text line; similarly, if not inside a
# literal section, do nothing if a literal follows, unless we are inside
# a .nf/.ne section. The point being that the <pre> and </pre> that delimit
# literal sections will do the spacing. Always skip if no previous output.
elsif (/^\.sp/)
{
if ($wrotetext)
{
$_ = <STDIN>;
if ($inpre)
{
print TEMP "\n" if (/^[\s.]/);
}
else
{
print TEMP "<br>\n<br>\n" if ($innf || !/^[\s.]/);
}
redo; # Now process the lookahead line we just read
}
}
elsif (/^\.TP/ || /^\.PP/ || /^\.P/)
{
&new_para();
}
elsif (/^\.SH\s*("?)(.*)\1/)
{
# Ignore the NAME section
if ($2 =~ /^NAME\b/)
{
<STDIN>;
next;
}
&end_para();
my($title) = &do_line($2);
if ($toc)
{
printf("<li><a name=\"TOC%d\" href=\"#SEC%d\">$title</a>\n",
$ref, $ref);
printf TEMP ("<br><a name=\"SEC%d\" href=\"#TOC1\">$title</a><br>\n",
$ref);
$ref++;
}
else
{
print TEMP "<br><b>\n$title\n</b><br>\n";
}
}
elsif (/^\.SS\s*("?)(.*)\1/)
{
&end_para();
my($title) = &do_line($2);
print TEMP "<br><b>\n$title\n</b><br>\n";
}
elsif (/^\.B\s*(.*)/)
{
&new_para() if (!$inpara);
$_ = &do_line($1);
s/"(.*?)"/$1/g;
print TEMP "<b>$_</b>\n";
$wrotetext = 1;
}
elsif (/^\.I\s*(.*)/)
{
&new_para() if (!$inpara);
$_ = &do_line($1);
s/"(.*?)"/$1/g;
print TEMP "<i>$_</i>\n";
$wrotetext = 1;
}
# A comment that starts "HREF" takes the next line as a name that
# is turned into a hyperlink, using the text given, which might be
# in a special font. If it ends in () or (digits) or punctuation, they
# aren't part of the link.
elsif (/^\.\\"\s*HREF/)
{
$_=<STDIN>;
chomp;
$_ = &do_line($_);
$_ =~ s/\s+$//;
$_ =~ /^(?:<.>)?([^<(]+)(?:\(\))?(?:<\/.>)?(?:\(\d+\))?[.,;:]?$/;
print TEMP "<a href=\"$1.html\">$_</a>\n";
}
# A comment that starts "HTML" inserts literal HTML
elsif (/^\.\\"\s*HTML\s*(.*)/)
{
print TEMP $1;
}
# A comment that starts < inserts that HTML at the end of the
# *next* input line - so as not to get a newline between them.
elsif (/^\.\\"\s*(<.*>)/)
{
my($markup) = $1;
$_=<STDIN>;
chomp;
$_ = &do_line($_);
$_ =~ s/\s+$//;
print TEMP "$_$markup\n";
}
# A comment that starts JOIN joins the next two lines together, with one
# space between them. Then that line is processed. This is used in some
# displays where two lines are needed for the "man" version. JOINSH works
# the same, except that it assumes this is a shell command, so removes
# continuation backslashes.
elsif (/^\.\\"\s*JOIN(SH)?/)
{
my($one,$two);
$one = <STDIN>;
$two = <STDIN>;
$one =~ s/\s*\\e\s*$// if (defined($1));
chomp($one);
$two =~ s/^\s+//;
$_ = "$one $two";
redo; # Process the joined lines
}
# .EX/.EE are used in the pcredemo page to bracket the entire program,
# which is unmodified except for turning backslash into "\e".
elsif (/^\.EX\s*$/)
{
print TEMP "<PRE>\n";
while (<STDIN>)
{
last if /^\.EE\s*$/;
s/\\e/\\/g;
s/&/&amp;/g;
s/</&lt;/g;
s/>/&gt;/g;
print TEMP;
}
}
# Ignore anything not recognized
next;
}
# Line does not begin with a dot. Replace blank lines with new paragraphs
if (/^\s*$/)
{
&end_para() if ($wrotetext);
next;
}
# Convert fonts changes and output an ordinary line. Ensure that indented
# lines are marked as literal.
$_ = &do_line($_);
&new_para() if (!$inpara);
if (/^\s/)
{
if (!$inpre)
{
print TEMP "<pre>\n";
$inpre = 1;
}
}
elsif ($inpre)
{
print TEMP "</pre>\n";
$inpre = 0;
}
# Add <br> to the end of a non-literal line if we are within .nf/.fi
$_ .= "<br>\n" if (!$inpre && $innf);
print TEMP;
$wrotetext = 1;
}
# The TOC, if present, will have been written - terminate it
print "</ul>\n" if ($toc);
# Copy the remainder to the standard output
close(TEMP);
open(TEMP, "/tmp/$$") || die "Can't open /tmp/$$ for input\n";
print while (<TEMP>);
print <<End ;
<p>
Return to the <a href="index.html">PCRE index page</a>.
</p>
End
close(TEMP);
unlink("/tmp/$$");
# End

45
pcre-8.40/AUTHORS
View File

@@ -1,45 +0,0 @@
THE MAIN PCRE LIBRARY
---------------------
Written by: Philip Hazel
Email local part: ph10
Email domain: cam.ac.uk
University of Cambridge Computing Service,
Cambridge, England.
Copyright (c) 1997-2017 University of Cambridge
All rights reserved
PCRE JUST-IN-TIME COMPILATION SUPPORT
-------------------------------------
Written by: Zoltan Herczeg
Email local part: hzmester
Emain domain: freemail.hu
Copyright(c) 2010-2017 Zoltan Herczeg
All rights reserved.
STACK-LESS JUST-IN-TIME COMPILER
--------------------------------
Written by: Zoltan Herczeg
Email local part: hzmester
Emain domain: freemail.hu
Copyright(c) 2009-2017 Zoltan Herczeg
All rights reserved.
THE C++ WRAPPER LIBRARY
-----------------------
Written by: Google Inc.
Copyright (c) 2007-2012 Google Inc
All rights reserved
####

1012
pcre-8.40/CMakeLists.txt
View File

File diff suppressed because it is too large Load Diff

5
pcre-8.40/COPYING
View File

@@ -1,5 +0,0 @@
PCRE LICENCE
Please see the file LICENCE in the PCRE distribution for licensing details.
End

6057
pcre-8.40/ChangeLog
View File

File diff suppressed because it is too large Load Diff

67
pcre-8.40/CheckMan
View File

@@ -1,67 +0,0 @@
#! /usr/bin/perl
# A script to scan PCRE's man pages to check for typos in the control
# sequences. I use only a small set of the available repertoire, so it is
# straightforward to check that nothing else has slipped in by mistake. This
# script should be called in the doc directory.
$yield = 0;
while (scalar(@ARGV) > 0)
{
$line = 0;
$file = shift @ARGV;
open (IN, $file) || die "Failed to open $file\n";
while (<IN>)
{
$line++;
if (/^\s*$/)
{
printf "Empty line $line of $file\n";
$yield = 1;
}
elsif (/^\./)
{
if (!/^\.\s*$|
^\.B\s+\S|
^\.TH\s\S|
^\.SH\s\S|
^\.SS\s\S|
^\.TP(?:\s?\d+)?\s*$|
^\.SM\s*$|
^\.br\s*$|
^\.rs\s*$|
^\.sp\s*$|
^\.nf\s*$|
^\.fi\s*$|
^\.P\s*$|
^\.PP\s*$|
^\.\\"(?:\ HREF)?\s*$|
^\.\\"\sHTML\s<a\shref="[^"]+?">\s*$|
^\.\\"\sHTML\s<a\sname="[^"]+?"><\/a>\s*$|
^\.\\"\s<\/a>\s*$|
^\.\\"\sJOINSH\s*$|
^\.\\"\sJOIN\s*$/x
)
{
printf "Bad control line $line of $file\n";
$yield = 1;
}
}
else
{
if (/\\[^ef]|\\f[^IBP]/)
{
printf "Bad backslash in line $line of $file\n";
$yield = 1;
}
}
}
close(IN);
}
exit $yield;
# End

113
pcre-8.40/CleanTxt
View File

@@ -1,113 +0,0 @@
#! /usr/bin/perl -w
# Script to take the output of nroff -man and remove all the backspacing and
# the page footers and the screen commands etc so that it is more usefully
# readable online. In fact, in the latest nroff, intermediate footers don't
# seem to be generated any more.
$blankcount = 0;
$lastwascut = 0;
$firstheader = 1;
# Input on STDIN; output to STDOUT.
while (<STDIN>)
{
s/\x1b\[\d+m//g; # Remove screen controls "ESC [ number m"
s/.\x8//g; # Remove "char, backspace"
# Handle header lines. Retain only the first one we encounter, but remove
# the blank line that follows. Any others (e.g. at end of document) and the
# following blank line are dropped.
if (/^PCRE(\w*)\(([13])\)\s+PCRE\1\(\2\)$/)
{
if ($firstheader)
{
$firstheader = 0;
print;
$lastprinted = $_;
$lastwascut = 0;
}
$_=<STDIN>; # Remove a blank that follows
next;
}
# Count runs of empty lines
if (/^\s*$/)
{
$blankcount++;
$lastwascut = 0;
next;
}
# If a chunk of lines has been cut out (page footer) and the next line
# has a different indentation, put back one blank line.
if ($lastwascut && $blankcount < 1 && defined($lastprinted))
{
($a) = $lastprinted =~ /^(\s*)/;
($b) = $_ =~ /^(\s*)/;
$blankcount++ if ($a ne $b);
}
# We get here only when we have a non-blank line in hand. If it was preceded
# by 3 or more blank lines, read the next 3 lines and see if they are blank.
# If so, remove all 7 lines, and remember that we have just done a cut.
if ($blankcount >= 3)
{
for ($i = 0; $i < 3; $i++)
{
$next[$i] = <STDIN>;
$next[$i] = "" if !defined $next[$i];
$next[$i] =~ s/\x1b\[\d+m//g; # Remove screen controls "ESC [ number m"
$next[$i] =~ s/.\x8//g; # Remove "char, backspace"
}
# Cut out chunks of the form <3 blanks><non-blank><3 blanks>
if ($next[0] =~ /^\s*$/ &&
$next[1] =~ /^\s*$/ &&
$next[2] =~ /^\s*$/)
{
$blankcount -= 3;
$lastwascut = 1;
}
# Otherwise output the saved blanks, the current, and the next three
# lines. Remember the last printed line.
else
{
for ($i = 0; $i < $blankcount; $i++) { print "\n"; }
print;
for ($i = 0; $i < 3; $i++)
{
$next[$i] =~ s/.\x8//g;
print $next[$i];
$lastprinted = $_;
}
$lastwascut = 0;
$blankcount = 0;
}
}
# This non-blank line is not preceded by 3 or more blank lines. Output
# any blanks there are, and the line. Remember it. Force two blank lines
# before headings.
else
{
$blankcount = 2 if /^\S/ && !/^Last updated/ && !/^Copyright/ &&
defined($lastprinted);
for ($i = 0; $i < $blankcount; $i++) { print "\n"; }
print;
$lastprinted = $_;
$lastwascut = 0;
$blankcount = 0;
}
}
# End

35
pcre-8.40/Detrail
View File

@@ -1,35 +0,0 @@
#!/usr/bin/perl
# This is a script for removing trailing whitespace from lines in files that
# are listed on the command line.
# This subroutine does the work for one file.
sub detrail {
my($file) = $_[0];
my($changed) = 0;
open(IN, "$file") || die "Can't open $file for input";
@lines = <IN>;
close(IN);
foreach (@lines)
{
if (/\s+\n$/)
{
s/\s+\n$/\n/;
$changed = 1;
}
}
if ($changed)
{
open(OUT, ">$file") || die "Can't open $file for output";
print OUT @lines;
close(OUT);
}
}
# This is the main program
$, = ""; # Output field separator
for ($i = 0; $i < @ARGV; $i++) { &detrail($ARGV[$i]); }
# End

528
pcre-8.40/HACKING
View File

@@ -1,528 +0,0 @@
Technical Notes about PCRE
--------------------------
These are very rough technical notes that record potentially useful information
about PCRE internals. For information about testing PCRE, see the pcretest
documentation and the comment at the head of the RunTest file.
Historical note 1
-----------------
Many years ago I implemented some regular expression functions to an algorithm
suggested by Martin Richards. These were not Unix-like in form, and were quite
restricted in what they could do by comparison with Perl. The interesting part
about the algorithm was that the amount of space required to hold the compiled
form of an expression was known in advance. The code to apply an expression did
not operate by backtracking, as the original Henry Spencer code and current
Perl code does, but instead checked all possibilities simultaneously by keeping
a list of current states and checking all of them as it advanced through the
subject string. In the terminology of Jeffrey Friedl's book, it was a "DFA
algorithm", though it was not a traditional Finite State Machine (FSM). When
the pattern was all used up, all remaining states were possible matches, and
the one matching the longest subset of the subject string was chosen. This did
not necessarily maximize the individual wild portions of the pattern, as is
expected in Unix and Perl-style regular expressions.
Historical note 2
-----------------
By contrast, the code originally written by Henry Spencer (which was
subsequently heavily modified for Perl) compiles the expression twice: once in
a dummy mode in order to find out how much store will be needed, and then for
real. (The Perl version probably doesn't do this any more; I'm talking about
the original library.) The execution function operates by backtracking and
maximizing (or, optionally, minimizing in Perl) the amount of the subject that
matches individual wild portions of the pattern. This is an "NFA algorithm" in
Friedl's terminology.
OK, here's the real stuff
-------------------------
For the set of functions that form the "basic" PCRE library (which are
unrelated to those mentioned above), I tried at first to invent an algorithm
that used an amount of store bounded by a multiple of the number of characters
in the pattern, to save on compiling time. However, because of the greater
complexity in Perl regular expressions, I couldn't do this. In any case, a
first pass through the pattern is helpful for other reasons.
Support for 16-bit and 32-bit data strings
-------------------------------------------
From release 8.30, PCRE supports 16-bit as well as 8-bit data strings; and from
release 8.32, PCRE supports 32-bit data strings. The library can be compiled
in any combination of 8-bit, 16-bit or 32-bit modes, creating up to three
different libraries. In the description that follows, the word "short" is used
for a 16-bit data quantity, and the word "unit" is used for a quantity that is
a byte in 8-bit mode, a short in 16-bit mode and a 32-bit word in 32-bit mode.
However, so as not to over-complicate the text, the names of PCRE functions are
given in 8-bit form only.
Computing the memory requirement: how it was
--------------------------------------------
Up to and including release 6.7, PCRE worked by running a very degenerate first
pass to calculate a maximum store size, and then a second pass to do the real
compile - which might use a bit less than the predicted amount of memory. The
idea was that this would turn out faster than the Henry Spencer code because
the first pass is degenerate and the second pass can just store stuff straight
into the vector, which it knows is big enough.
Computing the memory requirement: how it is
-------------------------------------------
By the time I was working on a potential 6.8 release, the degenerate first pass
had become very complicated and hard to maintain. Indeed one of the early
things I did for 6.8 was to fix Yet Another Bug in the memory computation. Then
I had a flash of inspiration as to how I could run the real compile function in
a "fake" mode that enables it to compute how much memory it would need, while
actually only ever using a few hundred bytes of working memory, and without too
many tests of the mode that might slow it down. So I refactored the compiling
functions to work this way. This got rid of about 600 lines of source. It
should make future maintenance and development easier. As this was such a major
change, I never released 6.8, instead upping the number to 7.0 (other quite
major changes were also present in the 7.0 release).
A side effect of this work was that the previous limit of 200 on the nesting
depth of parentheses was removed. However, there is a downside: pcre_compile()
runs more slowly than before (30% or more, depending on the pattern) because it
is doing a full analysis of the pattern. My hope was that this would not be a
big issue, and in the event, nobody has commented on it.
At release 8.34, a limit on the nesting depth of parentheses was re-introduced
(default 250, settable at build time) so as to put a limit on the amount of
system stack used by pcre_compile(). This is a safety feature for environments
with small stacks where the patterns are provided by users.
Traditional matching function
-----------------------------
The "traditional", and original, matching function is called pcre_exec(), and
it implements an NFA algorithm, similar to the original Henry Spencer algorithm
and the way that Perl works. This is not surprising, since it is intended to be
as compatible with Perl as possible. This is the function most users of PCRE
will use most of the time. From release 8.20, if PCRE is compiled with
just-in-time (JIT) support, and studying a compiled pattern with JIT is
successful, the JIT code is run instead of the normal pcre_exec() code, but the
result is the same.
Supplementary matching function
-------------------------------
From PCRE 6.0, there is also a supplementary matching function called
pcre_dfa_exec(). This implements a DFA matching algorithm that searches
simultaneously for all possible matches that start at one point in the subject
string. (Going back to my roots: see Historical Note 1 above.) This function
intreprets the same compiled pattern data as pcre_exec(); however, not all the
facilities are available, and those that are do not always work in quite the
same way. See the user documentation for details.
The algorithm that is used for pcre_dfa_exec() is not a traditional FSM,
because it may have a number of states active at one time. More work would be
needed at compile time to produce a traditional FSM where only one state is
ever active at once. I believe some other regex matchers work this way. JIT
support is not available for this kind of matching.
Changeable options
------------------
The /i, /m, or /s options (PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and some
others) may change in the middle of patterns. From PCRE 8.13, their processing
is handled entirely at compile time by generating different opcodes for the
different settings. The runtime functions do not need to keep track of an
options state any more.
Format of compiled patterns
---------------------------
The compiled form of a pattern is a vector of unsigned units (bytes in 8-bit
mode, shorts in 16-bit mode, 32-bit words in 32-bit mode), containing items of
variable length. The first unit in an item contains an opcode, and the length
of the item is either implicit in the opcode or contained in the data that
follows it.
In many cases listed below, LINK_SIZE data values are specified for offsets
within the compiled pattern. LINK_SIZE always specifies a number of bytes. The
default value for LINK_SIZE is 2, but PCRE can be compiled to use 3-byte or
4-byte values for these offsets, although this impairs the performance. (3-byte
LINK_SIZE values are available only in 8-bit mode.) Specifing a LINK_SIZE
larger than 2 is necessary only when patterns whose compiled length is greater
than 64K are going to be processed. In this description, we assume the "normal"
compilation options. Data values that are counts (e.g. quantifiers) are two
bytes long in 8-bit mode (most significant byte first), or one unit in 16-bit
and 32-bit modes.
Opcodes with no following data
------------------------------
These items are all just one unit long
OP_END end of pattern
OP_ANY match any one character other than newline
OP_ALLANY match any one character, including newline
OP_ANYBYTE match any single unit, even in UTF-8/16 mode
OP_SOD match start of data: \A
OP_SOM, start of match (subject + offset): \G
OP_SET_SOM, set start of match (\K)
OP_CIRC ^ (start of data)
OP_CIRCM ^ multiline mode (start of data or after newline)
OP_NOT_WORD_BOUNDARY \W
OP_WORD_BOUNDARY \w
OP_NOT_DIGIT \D
OP_DIGIT \d
OP_NOT_HSPACE \H
OP_HSPACE \h
OP_NOT_WHITESPACE \S
OP_WHITESPACE \s
OP_NOT_VSPACE \V
OP_VSPACE \v
OP_NOT_WORDCHAR \W
OP_WORDCHAR \w
OP_EODN match end of data or newline at end: \Z
OP_EOD match end of data: \z
OP_DOLL $ (end of data, or before final newline)
OP_DOLLM $ multiline mode (end of data or before newline)
OP_EXTUNI match an extended Unicode grapheme cluster
OP_ANYNL match any Unicode newline sequence
OP_ASSERT_ACCEPT )
OP_ACCEPT ) These are Perl 5.10's "backtracking control
OP_COMMIT ) verbs". If OP_ACCEPT is inside capturing
OP_FAIL ) parentheses, it may be preceded by one or more
OP_PRUNE ) OP_CLOSE, each followed by a count that
OP_SKIP ) indicates which parentheses must be closed.
OP_THEN )
OP_ASSERT_ACCEPT is used when (*ACCEPT) is encountered within an assertion.
This ends the assertion, not the entire pattern match.
Backtracking control verbs with optional data
---------------------------------------------
(*THEN) without an argument generates the opcode OP_THEN and no following data.
OP_MARK is followed by the mark name, preceded by a one-unit length, and
followed by a binary zero. For (*PRUNE), (*SKIP), and (*THEN) with arguments,
the opcodes OP_PRUNE_ARG, OP_SKIP_ARG, and OP_THEN_ARG are used, with the name
following in the same format as OP_MARK.
Matching literal characters
---------------------------
The OP_CHAR opcode is followed by a single character that is to be matched
casefully. For caseless matching, OP_CHARI is used. In UTF-8 or UTF-16 modes,
the character may be more than one unit long. In UTF-32 mode, characters
are always exactly one unit long.
If there is only one character in a character class, OP_CHAR or OP_CHARI is
used for a positive class, and OP_NOT or OP_NOTI for a negative one (that is,
for something like [^a]).
Repeating single characters
---------------------------
The common repeats (*, +, ?), when applied to a single character, use the
following opcodes, which come in caseful and caseless versions:
Caseful Caseless
OP_STAR OP_STARI
OP_MINSTAR OP_MINSTARI
OP_POSSTAR OP_POSSTARI
OP_PLUS OP_PLUSI
OP_MINPLUS OP_MINPLUSI
OP_POSPLUS OP_POSPLUSI
OP_QUERY OP_QUERYI
OP_MINQUERY OP_MINQUERYI
OP_POSQUERY OP_POSQUERYI
Each opcode is followed by the character that is to be repeated. In ASCII mode,
these are two-unit items; in UTF-8 or UTF-16 modes, the length is variable; in
UTF-32 mode these are one-unit items. Those with "MIN" in their names are the
minimizing versions. Those with "POS" in their names are possessive versions.
Other repeats make use of these opcodes:
Caseful Caseless
OP_UPTO OP_UPTOI
OP_MINUPTO OP_MINUPTOI
OP_POSUPTO OP_POSUPTOI
OP_EXACT OP_EXACTI
Each of these is followed by a count and then the repeated character. OP_UPTO
matches from 0 to the given number. A repeat with a non-zero minimum and a
fixed maximum is coded as an OP_EXACT followed by an OP_UPTO (or OP_MINUPTO or
OPT_POSUPTO).
Another set of matching repeating opcodes (called OP_NOTSTAR, OP_NOTSTARI,
etc.) are used for repeated, negated, single-character classes such as [^a]*.
The normal single-character opcodes (OP_STAR, etc.) are used for repeated
positive single-character classes.
Repeating character types
-------------------------
Repeats of things like \d are done exactly as for single characters, except
that instead of a character, the opcode for the type is stored in the data
unit. The opcodes are:
OP_TYPESTAR
OP_TYPEMINSTAR
OP_TYPEPOSSTAR
OP_TYPEPLUS
OP_TYPEMINPLUS
OP_TYPEPOSPLUS
OP_TYPEQUERY
OP_TYPEMINQUERY
OP_TYPEPOSQUERY
OP_TYPEUPTO
OP_TYPEMINUPTO
OP_TYPEPOSUPTO
OP_TYPEEXACT
Match by Unicode property
-------------------------
OP_PROP and OP_NOTPROP are used for positive and negative matches of a
character by testing its Unicode property (the \p and \P escape sequences).
Each is followed by two units that encode the desired property as a type and a
value. The types are a set of #defines of the form PT_xxx, and the values are
enumerations of the form ucp_xx, defined in the ucp.h source file. The value is
relevant only for PT_GC (General Category), PT_PC (Particular Category), and
PT_SC (Script).
Repeats of these items use the OP_TYPESTAR etc. set of opcodes, followed by
three units: OP_PROP or OP_NOTPROP, and then the desired property type and
value.
Character classes
-----------------
If there is only one character in a class, OP_CHAR or OP_CHARI is used for a
positive class, and OP_NOT or OP_NOTI for a negative one (that is, for
something like [^a]).
A set of repeating opcodes (called OP_NOTSTAR etc.) are used for repeated,
negated, single-character classes. The normal single-character opcodes
(OP_STAR, etc.) are used for repeated positive single-character classes.
When there is more than one character in a class, and all the code points are
less than 256, OP_CLASS is used for a positive class, and OP_NCLASS for a
negative one. In either case, the opcode is followed by a 32-byte (16-short,
8-word) bit map containing a 1 bit for every character that is acceptable. The
bits are counted from the least significant end of each unit. In caseless mode,
bits for both cases are set.
The reason for having both OP_CLASS and OP_NCLASS is so that, in UTF-8/16/32
mode, subject characters with values greater than 255 can be handled correctly.
For OP_CLASS they do not match, whereas for OP_NCLASS they do.
For classes containing characters with values greater than 255 or that contain
\p or \P, OP_XCLASS is used. It optionally uses a bit map if any code points
are less than 256, followed by a list of pairs (for a range) and single
characters. In caseless mode, both cases are explicitly listed.
OP_XCLASS is followed by a unit containing flag bits: XCL_NOT indicates that
this is a negative class, and XCL_MAP indicates that a bit map is present.
There follows the bit map, if XCL_MAP is set, and then a sequence of items
coded as follows:
XCL_END marks the end of the list
XCL_SINGLE one character follows
XCL_RANGE two characters follow
XCL_PROP a Unicode property (type, value) follows
XCL_NOTPROP a Unicode property (type, value) follows
If a range starts with a code point less than 256 and ends with one greater
than 256, an XCL_RANGE item is used, without setting any bits in the bit map.
This means that if no other items in the class set bits in the map, a map is
not needed.
Back references
---------------
OP_REF (caseful) or OP_REFI (caseless) is followed by a count containing the
reference number if the reference is to a unique capturing group (either by
number or by name). When named groups are used, there may be more than one
group with the same name. In this case, a reference by name generates OP_DNREF
or OP_DNREFI. These are followed by two counts: the index (not the byte offset)
in the group name table of the first entry for the requred name, followed by
the number of groups with the same name.
Repeating character classes and back references
-----------------------------------------------
Single-character classes are handled specially (see above). This section
applies to other classes and also to back references. In both cases, the repeat
information follows the base item. The matching code looks at the following
opcode to see if it is one of
OP_CRSTAR
OP_CRMINSTAR
OP_CRPOSSTAR
OP_CRPLUS
OP_CRMINPLUS
OP_CRPOSPLUS
OP_CRQUERY
OP_CRMINQUERY
OP_CRPOSQUERY
OP_CRRANGE
OP_CRMINRANGE
OP_CRPOSRANGE
All but the last three are single-unit items, with no data. The others are
followed by the minimum and maximum repeat counts.
Brackets and alternation
------------------------
A pair of non-capturing round brackets is wrapped round each expression at
compile time, so alternation always happens in the context of brackets.
[Note for North Americans: "bracket" to some English speakers, including
myself, can be round, square, curly, or pointy. Hence this usage rather than
"parentheses".]
Non-capturing brackets use the opcode OP_BRA. Originally PCRE was limited to 99
capturing brackets and it used a different opcode for each one. From release
3.5, the limit was removed by putting the bracket number into the data for
higher-numbered brackets. From release 7.0 all capturing brackets are handled
this way, using the single opcode OP_CBRA.
A bracket opcode is followed by LINK_SIZE bytes which give the offset to the
next alternative OP_ALT or, if there aren't any branches, to the matching
OP_KET opcode. Each OP_ALT is followed by LINK_SIZE bytes giving the offset to
the next one, or to the OP_KET opcode. For capturing brackets, the bracket
number is a count that immediately follows the offset.
OP_KET is used for subpatterns that do not repeat indefinitely, and OP_KETRMIN
and OP_KETRMAX are used for indefinite repetitions, minimally or maximally
respectively (see below for possessive repetitions). All three are followed by
LINK_SIZE bytes giving (as a positive number) the offset back to the matching
bracket opcode.
If a subpattern is quantified such that it is permitted to match zero times, it
is preceded by one of OP_BRAZERO, OP_BRAMINZERO, or OP_SKIPZERO. These are
single-unit opcodes that tell the matcher that skipping the following
subpattern entirely is a valid branch. In the case of the first two, not
skipping the pattern is also valid (greedy and non-greedy). The third is used
when a pattern has the quantifier {0,0}. It cannot be entirely discarded,
because it may be called as a subroutine from elsewhere in the regex.
A subpattern with an indefinite maximum repetition is replicated in the
compiled data its minimum number of times (or once with OP_BRAZERO if the
minimum is zero), with the final copy terminating with OP_KETRMIN or OP_KETRMAX
as appropriate.
A subpattern with a bounded maximum repetition is replicated in a nested
fashion up to the maximum number of times, with OP_BRAZERO or OP_BRAMINZERO
before each replication after the minimum, so that, for example, (abc){2,5} is
compiled as (abc)(abc)((abc)((abc)(abc)?)?)?, except that each bracketed group
has the same number.
When a repeated subpattern has an unbounded upper limit, it is checked to see
whether it could match an empty string. If this is the case, the opcode in the
final replication is changed to OP_SBRA or OP_SCBRA. This tells the matcher
that it needs to check for matching an empty string when it hits OP_KETRMIN or
OP_KETRMAX, and if so, to break the loop.
Possessive brackets
-------------------
When a repeated group (capturing or non-capturing) is marked as possessive by
the "+" notation, e.g. (abc)++, different opcodes are used. Their names all
have POS on the end, e.g. OP_BRAPOS instead of OP_BRA and OP_SCPBRPOS instead
of OP_SCBRA. The end of such a group is marked by OP_KETRPOS. If the minimum
repetition is zero, the group is preceded by OP_BRAPOSZERO.
Once-only (atomic) groups
-------------------------
These are just like other subpatterns, but they start with the opcode
OP_ONCE or OP_ONCE_NC. The former is used when there are no capturing brackets
within the atomic group; the latter when there are. The distinction is needed
for when there is a backtrack to before the group - any captures within the
group must be reset, so it is necessary to retain backtracking points inside
the group even after it is complete in order to do this. When there are no
captures in an atomic group, all the backtracking can be discarded when it is
complete. This is more efficient, and also uses less stack.
The check for matching an empty string in an unbounded repeat is handled
entirely at runtime, so there are just these two opcodes for atomic groups.
Assertions
----------
Forward assertions are also just like other subpatterns, but starting with one
of the opcodes OP_ASSERT or OP_ASSERT_NOT. Backward assertions use the opcodes
OP_ASSERTBACK and OP_ASSERTBACK_NOT, and the first opcode inside the assertion
is OP_REVERSE, followed by a count of the number of characters to move back the
pointer in the subject string. In ASCII mode, the count is a number of units,
but in UTF-8/16 mode each character may occupy more than one unit; in UTF-32
mode each character occupies exactly one unit. A separate count is present in
each alternative of a lookbehind assertion, allowing them to have different
fixed lengths.
Conditional subpatterns
-----------------------
These are like other subpatterns, but they start with the opcode OP_COND, or
OP_SCOND for one that might match an empty string in an unbounded repeat. If
the condition is a back reference, this is stored at the start of the
subpattern using the opcode OP_CREF followed by a count containing the
reference number, provided that the reference is to a unique capturing group.
If the reference was by name and there is more than one group with that name,
OP_DNCREF is used instead. It is followed by two counts: the index in the group
names table, and the number of groups with the same name.
If the condition is "in recursion" (coded as "(?(R)"), or "in recursion of
group x" (coded as "(?(Rx)"), the group number is stored at the start of the
subpattern using the opcode OP_RREF (with a value of zero for "the whole
pattern") or OP_DNRREF (with data as for OP_DNCREF). For a DEFINE condition,
just the single unit OP_DEF is used (it has no associated data). Otherwise, a
conditional subpattern always starts with one of the assertions.
Recursion
---------
Recursion either matches the current regex, or some subexpression. The opcode
OP_RECURSE is followed by aLINK_SIZE value that is the offset to the starting
bracket from the start of the whole pattern. From release 6.5, OP_RECURSE is
automatically wrapped inside OP_ONCE brackets, because otherwise some patterns
broke it. OP_RECURSE is also used for "subroutine" calls, even though they are
not strictly a recursion.
Callout
-------
OP_CALLOUT is followed by one unit of data that holds a callout number in the
range 0 to 254 for manual callouts, or 255 for an automatic callout. In both
cases there follows a count giving the offset in the pattern string to the
start of the following item, and another count giving the length of this item.
These values make is possible for pcretest to output useful tracing information
using automatic callouts.
Philip Hazel
November 2013

370
pcre-8.40/INSTALL
View File

@@ -1,370 +0,0 @@
Installation Instructions
*************************
Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.
Basic Installation
==================
Briefly, the shell command `./configure && make && make install'
should configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package. Some packages provide this
`INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the `make install' phase executed with root
privileges.
5. Optionally, type `make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior `make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
7. Often, you can also type `make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide `make
distcheck', which can by used by developers to test that all other
targets like `make install' and `make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'. This
is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple `-arch' options to the
compiler but only a single `-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the `lipo' tool if you have problems.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them. In general, the
default for these options is expressed in terms of `${prefix}', so that
specifying just `--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to `configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
`make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, `make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
`${prefix}'. Any directories that were specified during `configure',
but not in terms of `${prefix}', must each be overridden at install
time for the entire installation to be relocated. The approach of
makefile variable overrides for each directory variable is required by
the GNU Coding Standards, and ideally causes no recompilation.
However, some platforms have known limitations with the semantics of
shared libraries that end up requiring recompilation when using this
method, particularly noticeable in packages that use GNU Libtool.
The second method involves providing the `DESTDIR' variable. For
example, `make install DESTDIR=/alternate/directory' will prepend
`/alternate/directory' before all installation names. The approach of
`DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of `${prefix}'
at `configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of `make' will be. For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with `make V=0'.
Particular systems
==================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
HP-UX `make' updates targets which have the same time stamps as
their prerequisites, which makes it generally unusable when shipped
generated files such as `configure' are involved. Use GNU `make'
instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
to try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put `/usr/ucb' early in your `PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
in your `PATH', put it _after_ `/usr/bin'.
On Haiku, software installed for all users goes in `/boot/common',
not `/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf limitation. Until the limitation is lifted, you can use
this workaround:
CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of all of the options to `configure', and exit.
`--help=short'
`--help=recursive'
Print a summary of the options unique to this package's
`configure', and exit. The `short' variant lists options used
only in the top level, while the `recursive' variant lists options
also present in any nested packages.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--prefix=DIR'
Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
`--no-create'
`-n'
Run the configure checks, but stop before creating any output
files.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.

93
pcre-8.40/LICENCE
View File

@@ -1,93 +0,0 @@
PCRE LICENCE
------------
PCRE is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
Release 8 of PCRE is distributed under the terms of the "BSD" licence, as
specified below. The documentation for PCRE, supplied in the "doc"
directory, is distributed under the same terms as the software itself. The data
in the testdata directory is not copyrighted and is in the public domain.
The basic library functions are written in C and are freestanding. Also
included in the distribution is a set of C++ wrapper functions, and a
just-in-time compiler that can be used to optimize pattern matching. These
are both optional features that can be omitted when the library is built.
THE BASIC LIBRARY FUNCTIONS
---------------------------
Written by: Philip Hazel
Email local part: ph10
Email domain: cam.ac.uk
University of Cambridge Computing Service,
Cambridge, England.
Copyright (c) 1997-2017 University of Cambridge
All rights reserved.
PCRE JUST-IN-TIME COMPILATION SUPPORT
-------------------------------------
Written by: Zoltan Herczeg
Email local part: hzmester
Emain domain: freemail.hu
Copyright(c) 2010-2017 Zoltan Herczeg
All rights reserved.
STACK-LESS JUST-IN-TIME COMPILER
--------------------------------
Written by: Zoltan Herczeg
Email local part: hzmester
Emain domain: freemail.hu
Copyright(c) 2009-2017 Zoltan Herczeg
All rights reserved.
THE C++ WRAPPER FUNCTIONS
-------------------------
Contributed by: Google Inc.
Copyright (c) 2007-2012, Google Inc.
All rights reserved.
THE "BSD" LICENCE
-----------------
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the University of Cambridge nor the name of Google
Inc. nor the names of their contributors may be used to endorse or
promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
End

3296
pcre-8.40/Makefile
View File

File diff suppressed because it is too large Load Diff

895
pcre-8.40/Makefile.am
View File

@@ -1,895 +0,0 @@
## Process this file with automake to produce Makefile.in.
ACLOCAL_AMFLAGS = -I m4
dist_doc_DATA = \
doc/pcre.txt \
doc/pcre-config.txt \
doc/pcregrep.txt \
doc/pcretest.txt \
AUTHORS \
COPYING \
ChangeLog \
LICENCE \
NEWS \
README
# Note that pcrecpp.html is not in this list; it is listed separately below.
dist_html_DATA = \
doc/html/NON-AUTOTOOLS-BUILD.txt \
doc/html/README.txt \
doc/html/index.html \
doc/html/pcre-config.html \
doc/html/pcre.html \
doc/html/pcre16.html \
doc/html/pcre32.html \
doc/html/pcre_assign_jit_stack.html \
doc/html/pcre_compile.html \
doc/html/pcre_compile2.html \
doc/html/pcre_config.html \
doc/html/pcre_copy_named_substring.html \
doc/html/pcre_copy_substring.html \
doc/html/pcre_dfa_exec.html \
doc/html/pcre_exec.html \
doc/html/pcre_free_study.html \
doc/html/pcre_free_substring.html \
doc/html/pcre_free_substring_list.html \
doc/html/pcre_fullinfo.html \
doc/html/pcre_get_named_substring.html \
doc/html/pcre_get_stringnumber.html \
doc/html/pcre_get_stringtable_entries.html \
doc/html/pcre_get_substring.html \
doc/html/pcre_get_substring_list.html \
doc/html/pcre_jit_exec.html \
doc/html/pcre_jit_stack_alloc.html \
doc/html/pcre_jit_stack_free.html \
doc/html/pcre_maketables.html \
doc/html/pcre_pattern_to_host_byte_order.html \
doc/html/pcre_refcount.html \
doc/html/pcre_study.html \
doc/html/pcre_utf16_to_host_byte_order.html \
doc/html/pcre_utf32_to_host_byte_order.html \
doc/html/pcre_version.html \
doc/html/pcreapi.html \
doc/html/pcrebuild.html \
doc/html/pcrecallout.html \
doc/html/pcrecompat.html \
doc/html/pcredemo.html \
doc/html/pcregrep.html \
doc/html/pcrejit.html \
doc/html/pcrelimits.html \
doc/html/pcrematching.html \
doc/html/pcrepartial.html \
doc/html/pcrepattern.html \
doc/html/pcreperform.html \
doc/html/pcreposix.html \
doc/html/pcreprecompile.html \
doc/html/pcresample.html \
doc/html/pcrestack.html \
doc/html/pcresyntax.html \
doc/html/pcretest.html \
doc/html/pcreunicode.html
pcrecpp_html = doc/html/pcrecpp.html
dist_noinst_DATA = $(pcrecpp_html)
if WITH_PCRE_CPP
html_DATA = $(pcrecpp_html)
endif
# The Libtool libraries to install. We'll add to this later.
lib_LTLIBRARIES =
# Unit tests you want to run when people type 'make check'.
# TESTS is for binary unit tests, check_SCRIPTS for script-based tests
TESTS =
check_SCRIPTS =
dist_noinst_SCRIPTS =
# Some of the binaries we make are to be installed, and others are
# (non-user-visible) helper programs needed to build libpcre, libpcre16
# or libpcre32.
bin_PROGRAMS =
noinst_PROGRAMS =
# Additional files to delete on 'make clean' and 'make maintainer-clean'.
CLEANFILES =
MAINTAINERCLEANFILES =
# Additional files to bundle with the distribution, over and above what
# the Autotools include by default.
EXTRA_DIST =
# These files contain additional m4 macros that are used by autoconf.
EXTRA_DIST += \
m4/ax_pthread.m4 m4/pcre_visibility.m4
# These files contain maintenance information
EXTRA_DIST += \
doc/perltest.txt \
NON-UNIX-USE \
NON-AUTOTOOLS-BUILD \
HACKING
# These files are used in the preparation of a release
EXTRA_DIST += \
PrepareRelease \
CheckMan \
CleanTxt \
Detrail \
132html \
doc/index.html.src
# These files are to do with building for Virtual Pascal
EXTRA_DIST += \
makevp.bat \
makevp_c.txt \
makevp_l.txt \
pcregexp.pas
# These files are usable versions of pcre.h and config.h that are distributed
# for the benefit of people who are building PCRE manually, without the
# Autotools support.
EXTRA_DIST += \
pcre.h.generic \
config.h.generic
# The only difference between pcre.h.in and pcre.h is the setting of the PCRE
# version number. Therefore, we can create the generic version just by copying.
pcre.h.generic: pcre.h.in configure.ac
rm -f $@
cp -p pcre.h $@
# It is more complicated for config.h.generic. We need the version that results
# from a default configuration so as to get all the default values for PCRE
# configuration macros such as MATCH_LIMIT and NEWLINE. We can get this by
# doing a configure in a temporary directory. However, some trickery is needed,
# because the source directory may already be configured. If you just try
# running configure in a new directory, it complains. For this reason, we move
# config.status out of the way while doing the default configuration. The
# resulting config.h is munged by perl to put #ifdefs round any #defines for
# macros with values, and to #undef all boolean macros such as HAVE_xxx and
# SUPPORT_xxx. We also get rid of any gcc-specific visibility settings. Make
# sure that PCRE_EXP_DEFN is unset (in case it has visibility settings).
config.h.generic: configure.ac
rm -rf $@ _generic
mkdir _generic
cs=$(srcdir)/config.status; test ! -f $$cs || mv -f $$cs $$cs.aside
cd _generic && $(abs_top_srcdir)/configure || :
cs=$(srcdir)/config.status; test ! -f $$cs.aside || mv -f $$cs.aside $$cs
test -f _generic/config.h
perl -n \
-e 'BEGIN{$$blank=0;}' \
-e 'if(/PCRE_EXP_DEFN/){print"/* #undef PCRE_EXP_DEFN */\n";$$blank=0;next;}' \
-e 'if(/to make a symbol visible/){next;}' \
-e 'if(/__attribute__ \(\(visibility/){next;}' \
-e 'if(/LT_OBJDIR/){print"/* This is ignored unless you are using libtool. */\n";}' \
-e 'if(/^#define\s((?:HAVE|SUPPORT|STDC)_\w+)/){print"/* #undef $$1 */\n";$$blank=0;next;}' \
-e 'if(/^#define\s(?!PACKAGE|VERSION)(\w+)/){print"#ifndef $$1\n$$_#endif\n";$$blank=0;next;}' \
-e 'if(/^\s*$$/){print unless $$blank; $$blank=1;} else{print;$$blank=0;}' \
_generic/config.h >$@
rm -rf _generic
MAINTAINERCLEANFILES += pcre.h.generic config.h.generic
# These are the header files we'll install. We do not distribute pcre.h because
# it is generated from pcre.h.in.
nodist_include_HEADERS = \
pcre.h
include_HEADERS = \
pcreposix.h
# These additional headers will be be installed if C++ support is enabled. We
# do not distribute pcrecpparg.h or pcre_stringpiece.h, as these are generated
# from corresponding .h.in files (which we do distribute).
if WITH_PCRE_CPP
nodist_include_HEADERS += \
pcrecpparg.h \
pcre_stringpiece.h
include_HEADERS += \
pcrecpp.h \
pcre_scanner.h
endif # WITH_PCRE_CPP
bin_SCRIPTS = pcre-config
## ---------------------------------------------------------------
## The dftables program is used to rebuild character tables before compiling
## PCRE, if --enable-rebuild-chartables is specified. It is not a user-visible
## program. The default (when --enable-rebuild-chartables is not specified) is
## to copy a distributed set of tables that are defined for ASCII code. In this
## case, dftables is not needed.
if WITH_REBUILD_CHARTABLES
noinst_PROGRAMS += dftables
dftables_SOURCES = dftables.c
pcre_chartables.c: dftables$(EXEEXT)
./dftables$(EXEEXT) $@
else
pcre_chartables.c: $(srcdir)/pcre_chartables.c.dist
rm -f $@
$(LN_S) $(srcdir)/pcre_chartables.c.dist $@
endif # WITH_REBUILD_CHARTABLES
BUILT_SOURCES = pcre_chartables.c
## The main pcre library
# Build the 8 bit library if it is enabled.
if WITH_PCRE8
lib_LTLIBRARIES += libpcre.la
libpcre_la_SOURCES = \
pcre_byte_order.c \
pcre_compile.c \
pcre_config.c \
pcre_dfa_exec.c \
pcre_exec.c \
pcre_fullinfo.c \
pcre_get.c \
pcre_globals.c \
pcre_internal.h \
pcre_jit_compile.c \
pcre_maketables.c \
pcre_newline.c \
pcre_ord2utf8.c \
pcre_refcount.c \
pcre_string_utils.c \
pcre_study.c \
pcre_tables.c \
pcre_ucd.c \
pcre_valid_utf8.c \
pcre_version.c \
pcre_xclass.c \
ucp.h
libpcre_la_CFLAGS = \
$(VISIBILITY_CFLAGS) \
$(AM_CFLAGS)
libpcre_la_LIBADD =
## This file is generated as part of the building process, so don't distribute.
nodist_libpcre_la_SOURCES = \
pcre_chartables.c
endif # WITH_PCRE8
# Build the 16 bit library if it is enabled.
if WITH_PCRE16
lib_LTLIBRARIES += libpcre16.la
libpcre16_la_SOURCES = \
pcre16_byte_order.c \
pcre16_chartables.c \
pcre16_compile.c \
pcre16_config.c \
pcre16_dfa_exec.c \
pcre16_exec.c \
pcre16_fullinfo.c \
pcre16_get.c \
pcre16_globals.c \
pcre16_jit_compile.c \
pcre16_maketables.c \
pcre16_newline.c \
pcre16_ord2utf16.c \
pcre16_refcount.c \
pcre16_string_utils.c \
pcre16_study.c \
pcre16_tables.c \
pcre16_ucd.c \
pcre16_utf16_utils.c \
pcre16_valid_utf16.c \
pcre16_version.c \
pcre16_xclass.c
libpcre16_la_CFLAGS = \
$(VISIBILITY_CFLAGS) \
$(AM_CFLAGS)
libpcre16_la_LIBADD =
## This file is generated as part of the building process, so don't distribute.
nodist_libpcre16_la_SOURCES = \
pcre_chartables.c
endif # WITH_PCRE16
# Build the 32 bit library if it is enabled.
if WITH_PCRE32
lib_LTLIBRARIES += libpcre32.la
libpcre32_la_SOURCES = \
pcre32_byte_order.c \
pcre32_chartables.c \
pcre32_compile.c \
pcre32_config.c \
pcre32_dfa_exec.c \
pcre32_exec.c \
pcre32_fullinfo.c \
pcre32_get.c \
pcre32_globals.c \
pcre32_jit_compile.c \
pcre32_maketables.c \
pcre32_newline.c \
pcre32_ord2utf32.c \
pcre32_refcount.c \
pcre32_string_utils.c \
pcre32_study.c \
pcre32_tables.c \
pcre32_ucd.c \
pcre32_utf32_utils.c \
pcre32_valid_utf32.c \
pcre32_version.c \
pcre32_xclass.c
libpcre32_la_CFLAGS = \
$(VISIBILITY_CFLAGS) \
$(AM_CFLAGS)
libpcre32_la_LIBADD =
## This file is generated as part of the building process, so don't distribute.
nodist_libpcre32_la_SOURCES = \
pcre_chartables.c
endif # WITH_PCRE32
# The pcre_chartables.c.dist file is the default version of pcre_chartables.c,
# used unless --enable-rebuild-chartables is specified.
EXTRA_DIST += pcre_chartables.c.dist
# The JIT compiler lives in a separate directory, but its files are #included
# when pcre_jit_compile.c is processed, so they must be distributed.
EXTRA_DIST += \
sljit/sljitConfig.h \
sljit/sljitConfigInternal.h \
sljit/sljitExecAllocator.c \
sljit/sljitLir.c \
sljit/sljitLir.h \
sljit/sljitNativeARM_32.c \
sljit/sljitNativeARM_64.c \
sljit/sljitNativeARM_T2_32.c \
sljit/sljitNativeMIPS_32.c \
sljit/sljitNativeMIPS_64.c \
sljit/sljitNativeMIPS_common.c \
sljit/sljitNativePPC_32.c \
sljit/sljitNativePPC_64.c \
sljit/sljitNativePPC_common.c \
sljit/sljitNativeSPARC_32.c \
sljit/sljitNativeSPARC_common.c \
sljit/sljitNativeTILEGX_64.c \
sljit/sljitNativeTILEGX-encoder.c \
sljit/sljitNativeX86_32.c \
sljit/sljitNativeX86_64.c \
sljit/sljitNativeX86_common.c \
sljit/sljitUtils.c
if WITH_PCRE8
libpcre_la_LDFLAGS = $(EXTRA_LIBPCRE_LDFLAGS)
endif # WITH_PCRE8
if WITH_PCRE16
libpcre16_la_LDFLAGS = $(EXTRA_LIBPCRE16_LDFLAGS)
endif # WITH_PCRE16
if WITH_PCRE32
libpcre32_la_LDFLAGS = $(EXTRA_LIBPCRE32_LDFLAGS)
endif # WITH_PCRE32
if WITH_VALGRIND
if WITH_PCRE8
libpcre_la_CFLAGS += $(VALGRIND_CFLAGS)
endif # WITH_PCRE8
if WITH_PCRE16
libpcre16_la_CFLAGS += $(VALGRIND_CFLAGS)
endif # WITH_PCRE16
if WITH_PCRE32
libpcre32_la_CFLAGS += $(VALGRIND_CFLAGS)
endif # WITH_PCRE32
endif # WITH_VALGRIND
if WITH_GCOV
if WITH_PCRE8
libpcre_la_CFLAGS += $(GCOV_CFLAGS)
endif # WITH_PCRE8
if WITH_PCRE16
libpcre16_la_CFLAGS += $(GCOV_CFLAGS)
endif # WITH_PCRE16
if WITH_PCRE32
libpcre32_la_CFLAGS += $(GCOV_CFLAGS)
endif # WITH_PCRE32
endif # WITH_GCOV
CLEANFILES += pcre_chartables.c
## If JIT support is enabled, arrange for the JIT test program to run.
if WITH_JIT
TESTS += pcre_jit_test
noinst_PROGRAMS += pcre_jit_test
pcre_jit_test_SOURCES = pcre_jit_test.c
pcre_jit_test_CFLAGS = $(AM_CFLAGS)
pcre_jit_test_LDADD =
if WITH_PCRE8
pcre_jit_test_LDADD += libpcre.la
endif # WITH_PCRE8
if WITH_PCRE16
pcre_jit_test_LDADD += libpcre16.la
endif # WITH_PCRE16
if WITH_PCRE32
pcre_jit_test_LDADD += libpcre32.la
endif # WITH_PCRE32
if WITH_GCOV
pcre_jit_test_CFLAGS += $(GCOV_CFLAGS)
pcre_jit_test_LDADD += $(GCOV_LIBS)
endif # WITH_GCOV
endif # WITH_JIT
## A version of the main pcre library that has a posix re API.
if WITH_PCRE8
lib_LTLIBRARIES += libpcreposix.la
libpcreposix_la_SOURCES = \
pcreposix.c
libpcreposix_la_CFLAGS = $(VISIBILITY_CFLAGS) $(AM_CFLAGS)
libpcreposix_la_LDFLAGS = $(EXTRA_LIBPCREPOSIX_LDFLAGS)
libpcreposix_la_LIBADD = libpcre.la
if WITH_GCOV
libpcreposix_la_CFLAGS += $(GCOV_CFLAGS)
endif # WITH_GCOV
endif # WITH_PCRE8
## There's a C++ library as well.
if WITH_PCRE_CPP
lib_LTLIBRARIES += libpcrecpp.la
libpcrecpp_la_SOURCES = \
pcrecpp_internal.h \
pcrecpp.cc \
pcre_scanner.cc \
pcre_stringpiece.cc
libpcrecpp_la_CXXFLAGS = $(VISIBILITY_CXXFLAGS) $(AM_CXXFLAGS)
libpcrecpp_la_LDFLAGS = $(EXTRA_LIBPCRECPP_LDFLAGS)
libpcrecpp_la_LIBADD = libpcre.la
TESTS += pcrecpp_unittest
noinst_PROGRAMS += pcrecpp_unittest
pcrecpp_unittest_SOURCES = pcrecpp_unittest.cc
pcrecpp_unittest_CXXFLAGS = $(AM_CXXFLAGS)
pcrecpp_unittest_LDADD = libpcrecpp.la
TESTS += pcre_scanner_unittest
noinst_PROGRAMS += pcre_scanner_unittest
pcre_scanner_unittest_SOURCES = pcre_scanner_unittest.cc
pcre_scanner_unittest_CXXFLAGS = $(AM_CXXFLAGS)
pcre_scanner_unittest_LDADD = libpcrecpp.la
TESTS += pcre_stringpiece_unittest
noinst_PROGRAMS += pcre_stringpiece_unittest
pcre_stringpiece_unittest_SOURCES = pcre_stringpiece_unittest.cc
pcre_stringpiece_unittest_CXXFLAGS = $(AM_CXXFLAGS)
pcre_stringpiece_unittest_LDADD = libpcrecpp.la
if WITH_GCOV
libpcrecpp_la_CXXFLAGS += $(GCOV_CXXFLAGS)
pcrecpp_unittest_LDADD += $(GCOV_LIBS)
pcre_scanner_unittest_LDADD += $(GCOV_LIBS)
pcre_stringpiece_unittest_LDADD += $(GCOV_LIBS)
endif # WITH_GCOV
endif # WITH_PCRE_CPP
## The main unit tests
# Each unit test is a binary plus a script that runs that binary in various
# ways. We install these test binaries in case folks find it helpful.
TESTS += RunTest
dist_noinst_SCRIPTS += RunTest
EXTRA_DIST += RunTest.bat
bin_PROGRAMS += pcretest
pcretest_SOURCES = pcretest.c
pcretest_CFLAGS = $(AM_CFLAGS)
pcretest_LDADD = $(LIBREADLINE)
if WITH_PCRE8
pcretest_SOURCES += pcre_printint.c
pcretest_LDADD += libpcre.la libpcreposix.la
endif # WITH_PCRE8
if WITH_PCRE16
pcretest_SOURCES += pcre16_printint.c
pcretest_LDADD += libpcre16.la
endif # WITH_PCRE16
if WITH_PCRE32
pcretest_SOURCES += pcre32_printint.c
pcretest_LDADD += libpcre32.la
endif # WITH_PCRE32
if WITH_VALGRIND
pcretest_CFLAGS += $(VALGRIND_CFLAGS)
endif # WITH_VALGRIND
if WITH_GCOV
pcretest_CFLAGS += $(GCOV_CFLAGS)
pcretest_LDADD += $(GCOV_LIBS)
endif # WITH_GCOV
if WITH_PCRE8
TESTS += RunGrepTest
dist_noinst_SCRIPTS += RunGrepTest
bin_PROGRAMS += pcregrep
pcregrep_SOURCES = pcregrep.c
pcregrep_CFLAGS = $(AM_CFLAGS)
pcregrep_LDADD = $(LIBZ) $(LIBBZ2)
pcregrep_LDADD += libpcre.la libpcreposix.la
if WITH_GCOV
pcregrep_CFLAGS += $(GCOV_CFLAGS)
pcregrep_LDADD += $(GCOV_LIBS)
endif # WITH_GCOV
endif # WITH_PCRE8
EXTRA_DIST += \
testdata/grepbinary \
testdata/grepfilelist \
testdata/grepinput \
testdata/grepinput3 \
testdata/grepinput8 \
testdata/grepinputv \
testdata/grepinputx \
testdata/greplist \
testdata/grepoutput \
testdata/grepoutput8 \
testdata/grepoutputN \
testdata/greppatN4 \
testdata/saved16 \
testdata/saved16BE-1 \
testdata/saved16BE-2 \
testdata/saved16LE-1 \
testdata/saved16LE-2 \
testdata/saved32 \
testdata/saved32BE-1 \
testdata/saved32BE-2 \
testdata/saved32LE-1 \
testdata/saved32LE-2 \
testdata/saved8 \
testdata/testinput1 \
testdata/testinput2 \
testdata/testinput3 \
testdata/testinput4 \
testdata/testinput5 \
testdata/testinput6 \
testdata/testinput7 \
testdata/testinput8 \
testdata/testinput9 \
testdata/testinput10 \
testdata/testinput11 \
testdata/testinput12 \
testdata/testinput13 \
testdata/testinput14 \
testdata/testinput15 \
testdata/testinput16 \
testdata/testinput17 \
testdata/testinput18 \
testdata/testinput19 \
testdata/testinput20 \
testdata/testinput21 \
testdata/testinput22 \
testdata/testinput23 \
testdata/testinput24 \
testdata/testinput25 \
testdata/testinput26 \
testdata/testinputEBC \
testdata/testoutput1 \
testdata/testoutput2 \
testdata/testoutput3 \
testdata/testoutput3A \
testdata/testoutput3B \
testdata/testoutput4 \
testdata/testoutput5 \
testdata/testoutput6 \
testdata/testoutput7 \
testdata/testoutput8 \
testdata/testoutput9 \
testdata/testoutput10 \
testdata/testoutput11-8 \
testdata/testoutput11-16 \
testdata/testoutput11-32 \
testdata/testoutput12 \
testdata/testoutput13 \
testdata/testoutput14 \
testdata/testoutput15 \
testdata/testoutput16 \
testdata/testoutput17 \
testdata/testoutput18-16 \
testdata/testoutput18-32 \
testdata/testoutput19 \
testdata/testoutput20 \
testdata/testoutput21-16 \
testdata/testoutput21-32 \
testdata/testoutput22-16 \
testdata/testoutput22-32 \
testdata/testoutput23 \
testdata/testoutput24 \
testdata/testoutput25 \
testdata/testoutput26 \
testdata/testoutputEBC \
testdata/valgrind-jit.supp \
testdata/wintestinput3 \
testdata/wintestoutput3 \
perltest.pl
CLEANFILES += \
testsavedregex \
teststderr \
testtemp* \
testtry \
testNinput \
testtrygrep \
teststderrgrep \
testNinputgrep
# PCRE demonstration program. No longer built automatcally. The point is that
# the users should build it themselves. So just distribute the source.
# noinst_PROGRAMS += pcredemo
# pcredemo_SOURCES = pcredemo.c
# pcredemo_LDADD = libpcre.la
EXTRA_DIST += pcredemo.c
## Utility rules, documentation, etc.
# A compatibility line, the old build system worked with 'make test'
test: check ;
# A PCRE user submitted the following addition, saying that it "will allow
# anyone using the 'mingw32' compiler to simply type 'make pcre.dll' and get a
# nice DLL for Windows use". (It is used by the pcre.dll target.)
DLL_OBJS= pcre_byte_order.o pcre_compile.o pcre_config.o \
pcre_dfa_exec.o pcre_exec.o pcre_fullinfo.o pcre_get.o \
pcre_globals.o pcre_jit_compile.o pcre_maketables.o \
pcre_newline.o pcre_ord2utf8.o pcre_refcount.o \
pcre_study.o pcre_tables.o pcre_ucd.o \
pcre_valid_utf8.o pcre_version.o pcre_chartables.o \
pcre_xclass.o
# A PCRE user submitted the following addition, saying that it "will allow
# anyone using the 'mingw32' compiler to simply type 'make pcre.dll' and get a
# nice DLL for Windows use".
pcre.dll: $(DLL_OBJS)
$(CC) -shared -o pcre.dll -Wl,"--strip-all" -Wl,"--export-all-symbols" $(DLL_OBJS)
# We have .pc files for pkg-config users.
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = libpcre.pc libpcreposix.pc
if WITH_PCRE16
pkgconfig_DATA += libpcre16.pc
endif
if WITH_PCRE32
pkgconfig_DATA += libpcre32.pc
endif
if WITH_PCRE_CPP
pkgconfig_DATA += libpcrecpp.pc
endif
# Note that pcrecpp.3 is not in this list, but is included separately below.
dist_man_MANS = \
doc/pcre-config.1 \
doc/pcre.3 \
doc/pcre16.3 \
doc/pcre32.3 \
doc/pcre_assign_jit_stack.3 \
doc/pcre_compile.3 \
doc/pcre_compile2.3 \
doc/pcre_config.3 \
doc/pcre_copy_named_substring.3 \
doc/pcre_copy_substring.3 \
doc/pcre_dfa_exec.3 \
doc/pcre_exec.3 \
doc/pcre_free_study.3 \
doc/pcre_free_substring.3 \
doc/pcre_free_substring_list.3 \
doc/pcre_fullinfo.3 \
doc/pcre_get_named_substring.3 \
doc/pcre_get_stringnumber.3 \
doc/pcre_get_stringtable_entries.3 \
doc/pcre_get_substring.3 \
doc/pcre_get_substring_list.3 \
doc/pcre_jit_exec.3 \
doc/pcre_jit_stack_alloc.3 \
doc/pcre_jit_stack_free.3 \
doc/pcre_maketables.3 \
doc/pcre_pattern_to_host_byte_order.3 \
doc/pcre_refcount.3 \
doc/pcre_study.3 \
doc/pcre_utf16_to_host_byte_order.3 \
doc/pcre_utf32_to_host_byte_order.3 \
doc/pcre_version.3 \
doc/pcreapi.3 \
doc/pcrebuild.3 \
doc/pcrecallout.3 \
doc/pcrecompat.3 \
doc/pcredemo.3 \
doc/pcregrep.1 \
doc/pcrejit.3 \
doc/pcrelimits.3 \
doc/pcrematching.3 \
doc/pcrepartial.3 \
doc/pcrepattern.3 \
doc/pcreperform.3 \
doc/pcreposix.3 \
doc/pcreprecompile.3 \
doc/pcresample.3 \
doc/pcrestack.3 \
doc/pcresyntax.3 \
doc/pcretest.1 \
doc/pcreunicode.3
# Arrange for the per-function man pages to have 16- and 32-bit names as well.
install-data-hook:
ln -sf pcre_assign_jit_stack.3 $(DESTDIR)$(man3dir)/pcre16_assign_jit_stack.3
ln -sf pcre_compile.3 $(DESTDIR)$(man3dir)/pcre16_compile.3
ln -sf pcre_compile2.3 $(DESTDIR)$(man3dir)/pcre16_compile2.3
ln -sf pcre_config.3 $(DESTDIR)$(man3dir)/pcre16_config.3
ln -sf pcre_copy_named_substring.3 $(DESTDIR)$(man3dir)/pcre16_copy_named_substring.3
ln -sf pcre_copy_substring.3 $(DESTDIR)$(man3dir)/pcre16_copy_substring.3
ln -sf pcre_dfa_exec.3 $(DESTDIR)$(man3dir)/pcre16_dfa_exec.3
ln -sf pcre_exec.3 $(DESTDIR)$(man3dir)/pcre16_exec.3
ln -sf pcre_free_study.3 $(DESTDIR)$(man3dir)/pcre16_free_study.3
ln -sf pcre_free_substring.3 $(DESTDIR)$(man3dir)/pcre16_free_substring.3
ln -sf pcre_free_substring_list.3 $(DESTDIR)$(man3dir)/pcre16_free_substring_list.3
ln -sf pcre_fullinfo.3 $(DESTDIR)$(man3dir)/pcre16_fullinfo.3
ln -sf pcre_get_named_substring.3 $(DESTDIR)$(man3dir)/pcre16_get_named_substring.3
ln -sf pcre_get_stringnumber.3 $(DESTDIR)$(man3dir)/pcre16_get_stringnumber.3
ln -sf pcre_get_stringtable_entries.3 $(DESTDIR)$(man3dir)/pcre16_get_stringtable_entries.3
ln -sf pcre_get_substring.3 $(DESTDIR)$(man3dir)/pcre16_get_substring.3
ln -sf pcre_get_substring_list.3 $(DESTDIR)$(man3dir)/pcre16_get_substring_list.3
ln -sf pcre_jit_exec.3 $(DESTDIR)$(man3dir)/pcre16_jit_exec.3
ln -sf pcre_jit_stack_alloc.3 $(DESTDIR)$(man3dir)/pcre16_jit_stack_alloc.3
ln -sf pcre_jit_stack_free.3 $(DESTDIR)$(man3dir)/pcre16_jit_stack_free.3
ln -sf pcre_maketables.3 $(DESTDIR)$(man3dir)/pcre16_maketables.3
ln -sf pcre_pattern_to_host_byte_order.3 $(DESTDIR)$(man3dir)/pcre16_pattern_to_host_byte_order.3
ln -sf pcre_refcount.3 $(DESTDIR)$(man3dir)/pcre16_refcount.3
ln -sf pcre_study.3 $(DESTDIR)$(man3dir)/pcre16_study.3
ln -sf pcre_utf16_to_host_byte_order.3 $(DESTDIR)$(man3dir)/pcre16_utf16_to_host_byte_order.3
ln -sf pcre_version.3 $(DESTDIR)$(man3dir)/pcre16_version.3
ln -sf pcre_assign_jit_stack.3 $(DESTDIR)$(man3dir)/pcre32_assign_jit_stack.3
ln -sf pcre_compile.3 $(DESTDIR)$(man3dir)/pcre32_compile.3
ln -sf pcre_compile2.3 $(DESTDIR)$(man3dir)/pcre32_compile2.3
ln -sf pcre_config.3 $(DESTDIR)$(man3dir)/pcre32_config.3
ln -sf pcre_copy_named_substring.3 $(DESTDIR)$(man3dir)/pcre32_copy_named_substring.3
ln -sf pcre_copy_substring.3 $(DESTDIR)$(man3dir)/pcre32_copy_substring.3
ln -sf pcre_dfa_exec.3 $(DESTDIR)$(man3dir)/pcre32_dfa_exec.3
ln -sf pcre_exec.3 $(DESTDIR)$(man3dir)/pcre32_exec.3
ln -sf pcre_free_study.3 $(DESTDIR)$(man3dir)/pcre32_free_study.3
ln -sf pcre_free_substring.3 $(DESTDIR)$(man3dir)/pcre32_free_substring.3
ln -sf pcre_free_substring_list.3 $(DESTDIR)$(man3dir)/pcre32_free_substring_list.3
ln -sf pcre_fullinfo.3 $(DESTDIR)$(man3dir)/pcre32_fullinfo.3
ln -sf pcre_get_named_substring.3 $(DESTDIR)$(man3dir)/pcre32_get_named_substring.3
ln -sf pcre_get_stringnumber.3 $(DESTDIR)$(man3dir)/pcre32_get_stringnumber.3
ln -sf pcre_get_stringtable_entries.3 $(DESTDIR)$(man3dir)/pcre32_get_stringtable_entries.3
ln -sf pcre_get_substring.3 $(DESTDIR)$(man3dir)/pcre32_get_substring.3
ln -sf pcre_get_substring_list.3 $(DESTDIR)$(man3dir)/pcre32_get_substring_list.3
ln -sf pcre_jit_exec.3 $(DESTDIR)$(man3dir)/pcre32_jit_exec.3
ln -sf pcre_jit_stack_alloc.3 $(DESTDIR)$(man3dir)/pcre32_jit_stack_alloc.3
ln -sf pcre_jit_stack_free.3 $(DESTDIR)$(man3dir)/pcre32_jit_stack_free.3
ln -sf pcre_maketables.3 $(DESTDIR)$(man3dir)/pcre32_maketables.3
ln -sf pcre_pattern_to_host_byte_order.3 $(DESTDIR)$(man3dir)/pcre32_pattern_to_host_byte_order.3
ln -sf pcre_refcount.3 $(DESTDIR)$(man3dir)/pcre32_refcount.3
ln -sf pcre_study.3 $(DESTDIR)$(man3dir)/pcre32_study.3
ln -sf pcre_utf32_to_host_byte_order.3 $(DESTDIR)$(man3dir)/pcre32_utf32_to_host_byte_order.3
ln -sf pcre_version.3 $(DESTDIR)$(man3dir)/pcre32_version.3
pcrecpp_man = doc/pcrecpp.3
EXTRA_DIST += $(pcrecpp_man)
if WITH_PCRE_CPP
man_MANS = $(pcrecpp_man)
endif
# gcov/lcov code coverage reporting
if WITH_GCOV
# Coverage reporting targets:
#
# coverage: Create a coverage report from 'make check'
# coverage-baseline: Capture baseline coverage information
# coverage-reset: This zeros the coverage counters only
# coverage-report: This creates the coverage report only
# coverage-clean-report: This removes the generated coverage report
# without cleaning the coverage data itself
# coverage-clean-data: This removes the captured coverage data without
# removing the coverage files created at compile time (*.gcno)
# coverage-clean: This cleans all coverage data including the generated
# coverage report.
COVERAGE_TEST_NAME = $(PACKAGE)
COVERAGE_NAME = $(PACKAGE)-$(VERSION)
COVERAGE_OUTPUT_FILE = $(COVERAGE_NAME)-coverage.info
COVERAGE_OUTPUT_DIR = $(COVERAGE_NAME)-coverage
COVERAGE_LCOV_EXTRA_FLAGS =
COVERAGE_GENHTML_EXTRA_FLAGS =
coverage_quiet = $(coverage_quiet_$(V))
coverage_quiet_ = $(coverage_quiet_$(AM_DEFAULT_VERBOSITY))
coverage_quiet_0 = --quiet
coverage-check: all
-$(MAKE) $(AM_MAKEFLAGS) -k check
coverage-baseline:
$(LCOV) $(coverage_quiet) \
--directory $(top_builddir) \
--output-file "$(COVERAGE_OUTPUT_FILE)" \
--capture \
--initial
coverage-report:
$(LCOV) $(coverage_quiet) \
--directory $(top_builddir) \
--capture \
--output-file "$(COVERAGE_OUTPUT_FILE).tmp" \
--test-name "$(COVERAGE_TEST_NAME)" \
--no-checksum \
--compat-libtool \
$(COVERAGE_LCOV_EXTRA_FLAGS)
$(LCOV) $(coverage_quiet) \
--directory $(top_builddir) \
--output-file "$(COVERAGE_OUTPUT_FILE)" \
--remove "$(COVERAGE_OUTPUT_FILE).tmp" \
"/tmp/*" \
"/usr/include/*" \
"$(includedir)/*"
-@rm -f "$(COVERAGE_OUTPUT_FILE).tmp"
LANG=C $(GENHTML) $(coverage_quiet) \
--prefix $(top_builddir) \
--output-directory "$(COVERAGE_OUTPUT_DIR)" \
--title "$(PACKAGE) $(VERSION) Code Coverage Report" \
--show-details "$(COVERAGE_OUTPUT_FILE)" \
--legend \
$(COVERAGE_GENHTML_EXTRA_FLAGS)
@echo "Code coverage report written to file://$(abs_builddir)/$(COVERAGE_OUTPUT_DIR)/index.html"
coverage-reset:
-$(LCOV) $(coverage_quiet) --zerocounters --directory $(top_builddir)
coverage-clean-report:
-rm -f "$(COVERAGE_OUTPUT_FILE)" "$(COVERAGE_OUTPUT_FILE).tmp"
-rm -rf "$(COVERAGE_OUTPUT_DIR)"
coverage-clean-data:
-find $(top_builddir) -name "*.gcda" -delete
coverage-clean: coverage-reset coverage-clean-report coverage-clean-data
-find $(top_builddir) -name "*.gcno" -delete
coverage-distclean: coverage-clean
coverage: coverage-reset coverage-baseline coverage-check coverage-report
clean-local: coverage-clean
distclean-local: coverage-distclean
.PHONY: coverage coverage-baseline coverage-check coverage-report coverage-reset coverage-clean-report coverage-clean-data coverage-clean coverage-distclean
else
coverage:
@echo "Configuring with --enable-coverage required to generate code coverage report."
endif # WITH_GCOV
## CMake support
EXTRA_DIST += \
cmake/COPYING-CMAKE-SCRIPTS \
cmake/FindPackageHandleStandardArgs.cmake \
cmake/FindReadline.cmake \
cmake/FindEditline.cmake \
CMakeLists.txt \
config-cmake.h.in
## end Makefile.am

3296
pcre-8.40/Makefile.in
View File

File diff suppressed because it is too large Load Diff

731
pcre-8.40/NEWS
View File

@@ -1,731 +0,0 @@
News about PCRE releases
------------------------
Release 8.40 11-January-2017
----------------------------
This is a bug-fix release.
Release 8.39 14-June-2016
-------------------------
Some appropriate PCRE2 JIT improvements have been retro-fitted to PCRE1. Apart
from that, this is another bug-fix release. Note that this library (now called
PCRE1) is now being maintained for bug fixes only. New projects are advised to
use the new PCRE2 libraries.
Release 8.38 23-November-2015
-----------------------------
This is bug-fix release. Note that this library (now called PCRE1) is now being
maintained for bug fixes only. New projects are advised to use the new PCRE2
libraries.
Release 8.37 28-April-2015
--------------------------
This is bug-fix release. Note that this library (now called PCRE1) is now being
maintained for bug fixes only. New projects are advised to use the new PCRE2
libraries.
Release 8.36 26-September-2014
------------------------------
This is primarily a bug-fix release. However, in addition, the Unicode data
tables have been updated to Unicode 7.0.0.
Release 8.35 04-April-2014
--------------------------
There have been performance improvements for classes containing non-ASCII
characters and the "auto-possessification" feature has been extended. Other
minor improvements have been implemented and bugs fixed. There is a new callout
feature to enable applications to do detailed stack checks at compile time, to
avoid running out of stack for deeply nested parentheses. The JIT compiler has
been extended with experimental support for ARM-64, MIPS-64, and PPC-LE.
Release 8.34 15-December-2013
-----------------------------
As well as fixing the inevitable bugs, performance has been improved by
refactoring and extending the amount of "auto-possessification" that PCRE does.
Other notable changes:
. Implemented PCRE_INFO_MATCH_EMPTY, which yields 1 if the pattern can match
an empty string. If it can, pcretest shows this in its information output.
. A back reference to a named subpattern when there is more than one of the
same name now checks them in the order in which they appear in the pattern.
The first one that is set is used for the reference. Previously only the
first one was inspected. This change makes PCRE more compatible with Perl.
. Unicode character properties were updated from Unicode 6.3.0.
. The character VT has been added to the set of characters that match \s and
are generally treated as white space, following this same change in Perl
5.18. There is now no difference between "Perl space" and "POSIX space".
. Perl has changed its handling of \8 and \9. If there is no previously
encountered capturing group of those numbers, they are treated as the
literal characters 8 and 9 instead of a binary zero followed by the
literals. PCRE now does the same.
. Following Perl, added \o{} to specify codepoints in octal, making it
possible to specify values greater than 0777 and also making them
unambiguous.
. In UCP mode, \s was not matching two of the characters that Perl matches,
namely NEL (U+0085) and MONGOLIAN VOWEL SEPARATOR (U+180E), though they
were matched by \h.
. Add JIT support for the 64 bit TileGX architecture.
. Upgraded the handling of the POSIX classes [:graph:], [:print:], and
[:punct:] when PCRE_UCP is set so as to include the same characters as Perl
does in Unicode mode.
. Perl no longer allows group names to start with digits, so I have made this
change also in PCRE.
. Added support for [[:<:]] and [[:>:]] as used in the BSD POSIX library to
mean "start of word" and "end of word", respectively, as a transition aid.
Release 8.33 28-May-2013
--------------------------
A number of bugs are fixed, and some performance improvements have been made.
There are also some new features, of which these are the most important:
. The behaviour of the backtracking verbs has been rationalized and
documented in more detail.
. JIT now supports callouts and all of the backtracking verbs.
. Unicode validation has been updated in the light of Unicode Corrigendum #9,
which points out that "non characters" are not "characters that may not
appear in Unicode strings" but rather "characters that are reserved for
internal use and have only local meaning".
. (*LIMIT_MATCH=d) and (*LIMIT_RECURSION=d) have been added so that the
creator of a pattern can specify lower (but not higher) limits for the
matching process.
. The PCRE_NEVER_UTF option is available to prevent pattern-writers from using
the (*UTF) feature, as this could be a security issue.
Release 8.32 30-November-2012
-----------------------------
This release fixes a number of bugs, but also has some new features. These are
the highlights:
. There is now support for 32-bit character strings and UTF-32. Like the
16-bit support, this is done by compiling a separate 32-bit library.
. \X now matches a Unicode extended grapheme cluster.
. Case-independent matching of Unicode characters that have more than one
"other case" now makes all three (or more) characters equivalent. This
applies, for example, to Greek Sigma, which has two lowercase versions.
. Unicode character properties are updated to Unicode 6.2.0.
. The EBCDIC support, which had decayed, has had a spring clean.
. A number of JIT optimizations have been added, which give faster JIT
execution speed. In addition, a new direct interface to JIT execution is
available. This bypasses some of the sanity checks of pcre_exec() to give a
noticeable speed-up.
. A number of issues in pcregrep have been fixed, making it more compatible
with GNU grep. In particular, --exclude and --include (and variants) apply
to all files now, not just those obtained from scanning a directory
recursively. In Windows environments, the default action for directories is
now "skip" instead of "read" (which provokes an error).
. If the --only-matching (-o) option in pcregrep is specified multiple
times, each one causes appropriate output. For example, -o1 -o2 outputs the
substrings matched by the 1st and 2nd capturing parentheses. A separating
string can be specified by --om-separator (default empty).
. When PCRE is built via Autotools using a version of gcc that has the
"visibility" feature, it is used to hide internal library functions that are
not part of the public API.
Release 8.31 06-July-2012
-------------------------
This is mainly a bug-fixing release, with a small number of developments:
. The JIT compiler now supports partial matching and the (*MARK) and
(*COMMIT) verbs.
. PCRE_INFO_MAXLOOKBEHIND can be used to find the longest lookbehind in a
pattern.
. There should be a performance improvement when using the heap instead of the
stack for recursion.
. pcregrep can now be linked with libedit as an alternative to libreadline.
. pcregrep now has a --file-list option where the list of files to scan is
given as a file.
. pcregrep now recognizes binary files and there are related options.
. The Unicode tables have been updated to 6.1.0.
As always, the full list of changes is in the ChangeLog file.
Release 8.30 04-February-2012
-----------------------------
Release 8.30 introduces a major new feature: support for 16-bit character
strings, compiled as a separate library. There are a few changes to the
8-bit library, in addition to some bug fixes.
. The pcre_info() function, which has been obsolete for over 10 years, has
been removed.
. When a compiled pattern was saved to a file and later reloaded on a host
with different endianness, PCRE used automatically to swap the bytes in some
of the data fields. With the advent of the 16-bit library, where more of this
swapping is needed, it is no longer done automatically. Instead, the bad
endianness is detected and a specific error is given. The user can then call
a new function called pcre_pattern_to_host_byte_order() (or an equivalent
16-bit function) to do the swap.
. In UTF-8 mode, the values 0xd800 to 0xdfff are not legal Unicode
code points and are now faulted. (They are the so-called "surrogates"
that are reserved for coding high values in UTF-16.)
Release 8.21 12-Dec-2011
------------------------
This is almost entirely a bug-fix release. The only new feature is the ability
to obtain the size of the memory used by the JIT compiler.
Release 8.20 21-Oct-2011
------------------------
The main change in this release is the inclusion of Zoltan Herczeg's
just-in-time compiler support, which can be accessed by building PCRE with
--enable-jit. Large performance benefits can be had in many situations. 8.20
also fixes an unfortunate bug that was introduced in 8.13 as well as tidying up
a number of infelicities and differences from Perl.
Release 8.13 16-Aug-2011
------------------------
This is mainly a bug-fix release. There has been a lot of internal refactoring.
The Unicode tables have been updated. The only new feature in the library is
the passing of *MARK information to callouts. Some additions have been made to
pcretest to make testing easier and more comprehensive. There is a new option
for pcregrep to adjust its internal buffer size.
Release 8.12 15-Jan-2011
------------------------
This release fixes some bugs in pcregrep, one of which caused the tests to fail
on 64-bit big-endian systems. There are no changes to the code of the library.
Release 8.11 10-Dec-2010
------------------------
A number of bugs in the library and in pcregrep have been fixed. As always, see
ChangeLog for details. The following are the non-bug-fix changes:
. Added --match-limit and --recursion-limit to pcregrep.
. Added an optional parentheses number to the -o and --only-matching options
of pcregrep.
. Changed the way PCRE_PARTIAL_HARD affects the matching of $, \z, \Z, \b, and
\B.
. Added PCRE_ERROR_SHORTUTF8 to make it possible to distinguish between a
bad UTF-8 sequence and one that is incomplete when using PCRE_PARTIAL_HARD.
. Recognize (*NO_START_OPT) at the start of a pattern to set the PCRE_NO_
START_OPTIMIZE option, which is now allowed at compile time
Release 8.10 25-Jun-2010
------------------------
There are two major additions: support for (*MARK) and friends, and the option
PCRE_UCP, which changes the behaviour of \b, \d, \s, and \w (and their
opposites) so that they make use of Unicode properties. There are also a number
of lesser new features, and several bugs have been fixed. A new option,
--line-buffered, has been added to pcregrep, for use when it is connected to
pipes.
Release 8.02 19-Mar-2010
------------------------
Another bug-fix release.
Release 8.01 19-Jan-2010
------------------------
This is a bug-fix release. Several bugs in the code itself and some bugs and
infelicities in the build system have been fixed.
Release 8.00 19-Oct-09
----------------------
Bugs have been fixed in the library and in pcregrep. There are also some
enhancements. Restrictions on patterns used for partial matching have been
removed, extra information is given for partial matches, the partial matching
process has been improved, and an option to make a partial match override a
full match is available. The "study" process has been enhanced by finding a
lower bound matching length. Groups with duplicate numbers may now have
duplicated names without the use of PCRE_DUPNAMES. However, they may not have
different names. The documentation has been revised to reflect these changes.
The version number has been expanded to 3 digits as it is clear that the rate
of change is not slowing down.
Release 7.9 11-Apr-09
---------------------
Mostly bugfixes and tidies with just a couple of minor functional additions.
Release 7.8 05-Sep-08
---------------------
More bug fixes, plus a performance improvement in Unicode character property
lookup.
Release 7.7 07-May-08
---------------------
This is once again mainly a bug-fix release, but there are a couple of new
features.
Release 7.6 28-Jan-08
---------------------
The main reason for having this release so soon after 7.5 is because it fixes a
potential buffer overflow problem in pcre_compile() when run in UTF-8 mode. In
addition, the CMake configuration files have been brought up to date.
Release 7.5 10-Jan-08
---------------------
This is mainly a bug-fix release. However the ability to link pcregrep with
libz or libbz2 and the ability to link pcretest with libreadline have been
added. Also the --line-offsets and --file-offsets options were added to
pcregrep.
Release 7.4 21-Sep-07
---------------------
The only change of specification is the addition of options to control whether
\R matches any Unicode line ending (the default) or just CR, LF, and CRLF.
Otherwise, the changes are bug fixes and a refactoring to reduce the number of
relocations needed in a shared library. There have also been some documentation
updates, in particular, some more information about using CMake to build PCRE
has been added to the NON-UNIX-USE file.
Release 7.3 28-Aug-07
---------------------
Most changes are bug fixes. Some that are not:
1. There is some support for Perl 5.10's experimental "backtracking control
verbs" such as (*PRUNE).
2. UTF-8 checking is now as per RFC 3629 instead of RFC 2279; this is more
restrictive in the strings it accepts.
3. Checking for potential integer overflow has been made more dynamic, and as a
consequence there is no longer a hard limit on the size of a subpattern that
has a limited repeat count.
4. When CRLF is a valid line-ending sequence, pcre_exec() and pcre_dfa_exec()
no longer advance by two characters instead of one when an unanchored match
fails at CRLF if there are explicit CR or LF matches within the pattern.
This gets rid of some anomalous effects that previously occurred.
5. Some PCRE-specific settings for varying the newline options at the start of
a pattern have been added.
Release 7.2 19-Jun-07
---------------------
WARNING: saved patterns that were compiled by earlier versions of PCRE must be
recompiled for use with 7.2 (necessitated by the addition of \K, \h, \H, \v,
and \V).
Correction to the notes for 7.1: the note about shared libraries for Windows is
wrong. Previously, three libraries were built, but each could function
independently. For example, the pcreposix library also included all the
functions from the basic pcre library. The change is that the three libraries
are no longer independent. They are like the Unix libraries. To use the
pcreposix functions, for example, you need to link with both the pcreposix and
the basic pcre library.
Some more features from Perl 5.10 have been added:
(?-n) and (?+n) relative references for recursion and subroutines.
(?(-n) and (?(+n) relative references as conditions.
\k{name} and \g{name} are synonyms for \k<name>.
\K to reset the start of the matched string; for example, (foo)\Kbar
matches bar preceded by foo, but only sets bar as the matched string.
(?| introduces a group where the capturing parentheses in each alternative
start from the same number; for example, (?|(abc)|(xyz)) sets capturing
parentheses number 1 in both cases.
\h, \H, \v, \V match horizontal and vertical whitespace, respectively.
Release 7.1 24-Apr-07
---------------------
There is only one new feature in this release: a linebreak setting of
PCRE_NEWLINE_ANYCRLF. It is a cut-down version of PCRE_NEWLINE_ANY, which
recognizes only CRLF, CR, and LF as linebreaks.
A few bugs are fixed (see ChangeLog for details), but the major change is a
complete re-implementation of the build system. This now has full Autotools
support and so is now "standard" in some sense. It should help with compiling
PCRE in a wide variety of environments.
NOTE: when building shared libraries for Windows, three dlls are now built,
called libpcre, libpcreposix, and libpcrecpp. Previously, everything was
included in a single dll.
Another important change is that the dftables auxiliary program is no longer
compiled and run at "make" time by default. Instead, a default set of character
tables (assuming ASCII coding) is used. If you want to use dftables to generate
the character tables as previously, add --enable-rebuild-chartables to the
"configure" command. You must do this if you are compiling PCRE to run on a
system that uses EBCDIC code.
There is a discussion about character tables in the README file. The default is
not to use dftables so that that there is no problem when cross-compiling.
Release 7.0 19-Dec-06
---------------------
This release has a new major number because there have been some internal
upheavals to facilitate the addition of new optimizations and other facilities,
and to make subsequent maintenance and extension easier. Compilation is likely
to be a bit slower, but there should be no major effect on runtime performance.
Previously compiled patterns are NOT upwards compatible with this release. If
you have saved compiled patterns from a previous release, you will have to
re-compile them. Important changes that are visible to users are:
1. The Unicode property tables have been updated to Unicode 5.0.0, which adds
some more scripts.
2. The option PCRE_NEWLINE_ANY causes PCRE to recognize any Unicode newline
sequence as a newline.
3. The \R escape matches a single Unicode newline sequence as a single unit.
4. New features that will appear in Perl 5.10 are now in PCRE. These include
alternative Perl syntax for named parentheses, and Perl syntax for
recursion.
5. The C++ wrapper interface has been extended by the addition of a
QuoteMeta function and the ability to allow copy construction and
assignment.
For a complete list of changes, see the ChangeLog file.
Release 6.7 04-Jul-06
---------------------
The main additions to this release are the ability to use the same name for
multiple sets of parentheses, and support for CRLF line endings in both the
library and pcregrep (and in pcretest for testing).
Thanks to Ian Taylor, the stack usage for many kinds of pattern has been
significantly reduced for certain subject strings.
Release 6.5 01-Feb-06
---------------------
Important changes in this release:
1. A number of new features have been added to pcregrep.
2. The Unicode property tables have been updated to Unicode 4.1.0, and the
supported properties have been extended with script names such as "Arabic",
and the derived properties "Any" and "L&". This has necessitated a change to
the interal format of compiled patterns. Any saved compiled patterns that
use \p or \P must be recompiled.
3. The specification of recursion in patterns has been changed so that all
recursive subpatterns are automatically treated as atomic groups. Thus, for
example, (?R) is treated as if it were (?>(?R)). This is necessary because
otherwise there are situations where recursion does not work.
See the ChangeLog for a complete list of changes, which include a number of bug
fixes and tidies.
Release 6.0 07-Jun-05
---------------------
The release number has been increased to 6.0 because of the addition of several
major new pieces of functionality.
A new function, pcre_dfa_exec(), which implements pattern matching using a DFA
algorithm, has been added. This has a number of advantages for certain cases,
though it does run more slowly, and lacks the ability to capture substrings. On
the other hand, it does find all matches, not just the first, and it works
better for partial matching. The pcrematching man page discusses the
differences.
The pcretest program has been enhanced so that it can make use of the new
pcre_dfa_exec() matching function and the extra features it provides.
The distribution now includes a C++ wrapper library. This is built
automatically if a C++ compiler is found. The pcrecpp man page discusses this
interface.
The code itself has been re-organized into many more files, one for each
function, so it no longer requires everything to be linked in when static
linkage is used. As a consequence, some internal functions have had to have
their names exposed. These functions all have names starting with _pcre_. They
are undocumented, and are not intended for use by outside callers.
The pcregrep program has been enhanced with new functionality such as
multiline-matching and options for output more matching context. See the
ChangeLog for a complete list of changes to the library and the utility
programs.
Release 5.0 13-Sep-04
---------------------
The licence under which PCRE is released has been changed to the more
conventional "BSD" licence.
In the code, some bugs have been fixed, and there are also some major changes
in this release (which is why I've increased the number to 5.0). Some changes
are internal rearrangements, and some provide a number of new facilities. The
new features are:
1. There's an "automatic callout" feature that inserts callouts before every
item in the regex, and there's a new callout field that gives the position
in the pattern - useful for debugging and tracing.
2. The extra_data structure can now be used to pass in a set of character
tables at exec time. This is useful if compiled regex are saved and re-used
at a later time when the tables may not be at the same address. If the
default internal tables are used, the pointer saved with the compiled
pattern is now set to NULL, which means that you don't need to do anything
special unless you are using custom tables.
3. It is possible, with some restrictions on the content of the regex, to
request "partial" matching. A special return code is given if all of the
subject string matched part of the regex. This could be useful for testing
an input field as it is being typed.
4. There is now some optional support for Unicode character properties, which
means that the patterns items such as \p{Lu} and \X can now be used. Only
the general category properties are supported. If PCRE is compiled with this
support, an additional 90K data structure is include, which increases the
size of the library dramatically.
5. There is support for saving compiled patterns and re-using them later.
6. There is support for running regular expressions that were compiled on a
different host with the opposite endianness.
7. The pcretest program has been extended to accommodate the new features.
The main internal rearrangement is that sequences of literal characters are no
longer handled as strings. Instead, each character is handled on its own. This
makes some UTF-8 handling easier, and makes the support of partial matching
possible. Compiled patterns containing long literal strings will be larger as a
result of this change; I hope that performance will not be much affected.
Release 4.5 01-Dec-03
---------------------
Again mainly a bug-fix and tidying release, with only a couple of new features:
1. It's possible now to compile PCRE so that it does not use recursive
function calls when matching. Instead it gets memory from the heap. This slows
things down, but may be necessary on systems with limited stacks.
2. UTF-8 string checking has been tightened to reject overlong sequences and to
check that a starting offset points to the start of a character. Failure of the
latter returns a new error code: PCRE_ERROR_BADUTF8_OFFSET.
3. PCRE can now be compiled for systems that use EBCDIC code.
Release 4.4 21-Aug-03
---------------------
This is mainly a bug-fix and tidying release. The only new feature is that PCRE
checks UTF-8 strings for validity by default. There is an option to suppress
this, just in case anybody wants that teeny extra bit of performance.
Releases 4.1 - 4.3
------------------
Sorry, I forgot about updating the NEWS file for these releases. Please take a
look at ChangeLog.
Release 4.0 17-Feb-03
---------------------
There have been a lot of changes for the 4.0 release, adding additional
functionality and mending bugs. Below is a list of the highlights of the new
functionality. For full details of these features, please consult the
documentation. For a complete list of changes, see the ChangeLog file.
1. Support for Perl's \Q...\E escapes.
2. "Possessive quantifiers" ?+, *+, ++, and {,}+ which come from Sun's Java
package. They provide some syntactic sugar for simple cases of "atomic
grouping".
3. Support for the \G assertion. It is true when the current matching position
is at the start point of the match.
4. A new feature that provides some of the functionality that Perl provides
with (?{...}). The facility is termed a "callout". The way it is done in PCRE
is for the caller to provide an optional function, by setting pcre_callout to
its entry point. To get the function called, the regex must include (?C) at
appropriate points.
5. Support for recursive calls to individual subpatterns. This makes it really
easy to get totally confused.
6. Support for named subpatterns. The Python syntax (?P<name>...) is used to
name a group.
7. Several extensions to UTF-8 support; it is now fairly complete. There is an
option for pcregrep to make it operate in UTF-8 mode.
8. The single man page has been split into a number of separate man pages.
These also give rise to individual HTML pages which are put in a separate
directory. There is an index.html page that lists them all. Some hyperlinking
between the pages has been installed.
Release 3.5 15-Aug-01
---------------------
1. The configuring system has been upgraded to use later versions of autoconf
and libtool. By default it builds both a shared and a static library if the OS
supports it. You can use --disable-shared or --disable-static on the configure
command if you want only one of them.
2. The pcretest utility is now installed along with pcregrep because it is
useful for users (to test regexs) and by doing this, it automatically gets
relinked by libtool. The documentation has been turned into a man page, so
there are now .1, .txt, and .html versions in /doc.
3. Upgrades to pcregrep:
(i) Added long-form option names like gnu grep.
(ii) Added --help to list all options with an explanatory phrase.
(iii) Added -r, --recursive to recurse into sub-directories.
(iv) Added -f, --file to read patterns from a file.
4. Added --enable-newline-is-cr and --enable-newline-is-lf to the configure
script, to force use of CR or LF instead of \n in the source. On non-Unix
systems, the value can be set in config.h.
5. The limit of 200 on non-capturing parentheses is a _nesting_ limit, not an
absolute limit. Changed the text of the error message to make this clear, and
likewise updated the man page.
6. The limit of 99 on the number of capturing subpatterns has been removed.
The new limit is 65535, which I hope will not be a "real" limit.
Release 3.3 01-Aug-00
---------------------
There is some support for UTF-8 character strings. This is incomplete and
experimental. The documentation describes what is and what is not implemented.
Otherwise, this is just a bug-fixing release.
Release 3.0 01-Feb-00
---------------------
1. A "configure" script is now used to configure PCRE for Unix systems. It
builds a Makefile, a config.h file, and the pcre-config script.
2. PCRE is built as a shared library by default.
3. There is support for POSIX classes such as [:alpha:].
5. There is an experimental recursion feature.
----------------------------------------------------------------------------
IMPORTANT FOR THOSE UPGRADING FROM VERSIONS BEFORE 2.00
Please note that there has been a change in the API such that a larger
ovector is required at matching time, to provide some additional workspace.
The new man page has details. This change was necessary in order to support
some of the new functionality in Perl 5.005.
IMPORTANT FOR THOSE UPGRADING FROM VERSION 2.00
Another (I hope this is the last!) change has been made to the API for the
pcre_compile() function. An additional argument has been added to make it
possible to pass over a pointer to character tables built in the current
locale by pcre_maketables(). To use the default tables, this new argument
should be passed as NULL.
IMPORTANT FOR THOSE UPGRADING FROM VERSION 2.05
Yet another (and again I hope this really is the last) change has been made
to the API for the pcre_exec() function. An additional argument has been
added to make it possible to start the match other than at the start of the
subject string. This is important if there are lookbehinds. The new man
page has the details, but you just want to convert existing programs, all
you need to do is to stick in a new fifth argument to pcre_exec(), with a
value of zero. For example, change
pcre_exec(pattern, extra, subject, length, options, ovec, ovecsize)
to
pcre_exec(pattern, extra, subject, length, 0, options, ovec, ovecsize)
****

Some files were not shown because too many files have changed in this diff Show More